IT / EN
Skip to Content
ARES 440 Tec ErP
Code 3.025687
Heat output ref. 80-60°C kW 424,3
Heat output ref. 50-30°C kW 445,4
Efficiency at nominal heat output ref. 80-60 °C 98,2%
Efficiency at nominal heat output ref. 50-30 °C 103,1%
Dimensions (HxWxD) mm 1448 x 1087 x 946
Modulating heat output 5 - 100%
Floor standing modular condensing boiler.
424,3 kW heat output.
Designed for creating and restructuring any kind of technical room, it offers great flexibility in terms of modulation and power (up to 1:40) with high seasonal efficiency.
Extremely noiseless, it can be installed even if unsheltered and thanks to its extraordinary power/dimension/weight ratio it is ideal when the station space is reduced. ARES Tec ErP is not only a condensing boiler but a multi-burner  mono-block that combines several independent heating units, all managed by one single electronic control logic. It is possible to hydraulically combine up to 8 boilers in cascade configuration and prearrange the system for the remote management and remote control.
Certified for indoor or outdoor installations thanks to the IPX5D electric protection, the appliance is supplied with a standard -5 °C anti-freeze protection kit.
Thanks to low emissions of carbon monoxide (CO) and nitrogen oxide (NOX), ARES 440 Tec ErP belongs to class 5, the most environmentally-friendly class established by the European standards (UNI EN 297 e UNI EN 483).
Wide modulating heat output
Ideal for energy efficiency upgrade
High heat output
Thermoregulation
Cascade regulator ARES Tec      Cod. 3.023667
Zones expansion kit ARES Tec       Code 3.023664
Zone manager ARES Tec      Code 3.023665
Modulating room themostat ARES Tec       Code 3.023666
Flow probe kit ARES Tec       Cod. 3.023700
Wall box kit for cascade regulator ARES Tec       Code 3.023668
Interface kit for modem connection and tele-management ARES Tec       Code 3.023669
Free downloading online software
Solar collector temperature probe kit for UB Inox Solar 200-2, HERCULES Solar      Code 1.028812
As per standard with these products.
Flue systems
Supporting kit for side flue discharge ARES Tec       Code 3.023675
All models.
Options
Safety kit complete with pump and hydraulic separator from ARES Tec 440 kW to ARES Tec 770 kW      Code 3.023648
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Safety kit with filter from ARES Tec 440 kW to ARES Tec 770 kW      Code 3.023657
To be mainly used when the pump is dimensioned by designer. The safety kit includes: pressure gauge with pipe damper and, manometer cock, thermometer, inspection openings, stub pipes G1 ¼'' for inserting safety valves, safety thermostat, manual reset pressure switch for minimum pressure, additional stub pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve, drain valve and manometer, since these need to be sized according to the characteristics of the system.
Hydraulic separator from ARES Tec 440 kW to ARES Tec 900 kW      Code 3.023660

To be mainly used when the pump is independently dimensioned by the designer.

Outdoor casing for safety kit and hydraulic separator from ARES Tec 440 kW to ARES Tec 900 kW      Code 3.023671

In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.

Safety kit complete with pump and plate heat exchanger for ARES Tec 440/550 kW      Code 3.023652
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Outdoor casing for safety kit and plate heat exchanger from ARES Tec 440 kW to 900 kW      Code 3.023673

In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.

Condensate neutralizer kit ARES Tec up to 1500 kW      Code 3.023662

With grains.

Granulate kit for condensate neutralizer ARES Tec (25 kg)      Code 3.023663
Thermoregulation
Flue systems
Options
Related products
ARES 550 Tec ErP
Floor-standing modular condensing boiler for thermal power stations

OPEN PRODUCT

ARES 350 Tec ErP
Floor-standing modular condensing boiler for thermal power stations

OPEN PRODUCT

 
CONTACT US
 
 
QUALITY IN SERVICES
MADE IN ITALY
50 years of experience
OVER 6 MILLION BOILERS INSTALLED