Thermoregulation
- Thermoregulation
- Options
- Corporate
- Products
Products- Hybrid systems
- Hybrid systems
- Whole range
- Thermoregulation
- Heat Pumps
- Heat Pumps
- Whole range
- Water heaters
- Thermoregulation
- Fancoil units
- Thermal solar system
- Thermal solar system
- Whole range
- Packs
- Individual components
- Solar ready solutions
- Boilers
- Storage tanks
- Optionals
- Optionals
- Whole range
- Thermoregulation
- Flue systems
- Options
- Hybrid systems
- Press area
Optionals MAGIS M6 EH3
The range of Immergas accessories ensures ease of installation, all types of programming and remote control.
Optionals, one by one
Filters
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
Remote control kit
Cod.3.023364
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3% or 4%*
* as standard
Documentation
Thermoregulation
Room hygrostat
Cod.3.023302
To be used with radiant systems that also work in cooling mode.
Documentation
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Thermoregulation
System controller
Cod.3.021522
Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
* as standard
Documentation
Thermoregulation
Temperature/humidity active sensor kit
Cod.3.021524
To be used with radiant systems that also work in cooling mode.
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*
* as standard
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
EMR 12 VDC relay kit
Cod.3.023945
only for system controller
Thermoregulation
Probe kit for MAGIS M4-30
Cod.3.033324
To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.
Thermoregulation
Remote control kit
Cod.3.023364
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3% or 4%*
* as standard
Documentation
Thermoregulation
Room hygrostat
Cod.3.023302
To be used with radiant systems that also work in cooling mode.
Documentation
Thermoregulation
SSR 6 VDC relay kit
Cod.3.023946
only for system controller
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Thermoregulation
System controller
Cod.3.021522
Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
* as standard
Documentation
Thermoregulation
System controller expansion kit
Cod.3.021547
Documentation
Thermoregulation
System controller expansion kit
Cod.3.029912
Documentation
Thermoregulation
Temperature/humidity active sensor kit
Cod.3.021524
To be used with radiant systems that also work in cooling mode.
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*
* as standard
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Options
3-way valve kit
Cod.3.020632
Documentation
Options
12 litre system expansion vessel kit
Cod.3.011679
for plants with MAGIS M.
Options
Additional 2 kW electric resistance kit for OMNISTOR, INOXSTOR V2 and UB 550/750
Cod.3.020861
Power supply 230 or 400 Vac.
Documentation
Options
Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750
Cod.3.020862
Power supply 230 or 400 Vac.
Documentation
Options
Antivibration supports (3 pieces)
Cod.3.032854
For MAGIS M
Options
Bracket kit for wall mounting 75 inertial storage tank
Cod.3.027290
Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
Documentation
Options
Connection kit with flexible pipes and shut-off knobs 1"
Cod.3.025954
For MAGIS M4 and 6
Documentation
Options
Dehumidifier back frame kit
Cod.3.022146
Options
Dehumidifier front grille kit
Cod.3.022147
Options
Dehumidifier kit
Cod.3.021529
Only for recessed installation with codes 3.022146 and 3.022147
Documentation
Options
Distribution manifold kit for 1 direct and 2 mixed temperature zones
Cod.3.021527
The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each mixed delivery.
Wall-hung or recessed installation. Low consumption pumps.
Wall-hung or recessed installation. Low consumption pumps.
Documentation
Options
Distribution manifold kit for 2 mixed temperature zones
Cod.3.021528
The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each delivery.
Wall-hung or recessed installation. Low consumption pumps.
Wall-hung or recessed installation. Low consumption pumps.
Documentation
Options
External cover kit with acoustical insulation for ZENITAIR-MONO
Cod.3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
Options
HYDRO 3 V2
Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Documentation
Options
HYDRO 4 V2
Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Options
HYDRO FS 200
Cod.3.028500
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 400
Cod.3.028501
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 600
Cod.3.028502
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 800
Cod.3.028503
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 1000
Cod.3.028505
Floor standing hydronic fancoil
Documentation
Options
INOXSTOR 200 V2
Cod.3.027746
INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Documentation
Options
OMNISTOR 300
Cod.3.027910
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
OMNISTOR 500
Cod.3.027911
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
Probe kit for PT 1000 solar collector
Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Options
Vertical buffer tank with capacity of 50 litres
Cod.3.027539
Documentation
Options
Vertical inertial storage tank 75 litre
Cod.3.027288
Wall-hung (with bracket option kit) or floor-standing installation.
Documentation
Options
ZENITAIR MONO
Cod.3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
Documentation
Options
3-way valve kit
Cod.3.020632
Documentation
Options
Additional 2 kW electric resistance kit for OMNISTOR, INOXSTOR V2 and UB 550/750
Cod.3.020861
Power supply 230 or 400 Vac.
Documentation
Options
Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750
Cod.3.020862
Power supply 230 or 400 Vac.
Documentation
Options
INOXSTOR 200 V2
Cod.3.027746
INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Documentation
Options
Probe kit for PT 1000 solar collector
Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Options
3-way valve kit
Cod.3.020632
Documentation
Options
Bracket kit for wall mounting 75 inertial storage tank
Cod.3.027290
Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
Documentation
Options
Connection kit with flexible pipes and shut-off knobs 1"
Cod.3.025954
For MAGIS M4 and 6
Documentation
Options
Dehumidifier back frame kit
Cod.3.022146
Options
Dehumidifier front grille kit
Cod.3.022147
Options
Dehumidifier kit
Cod.3.021529
Only for recessed installation with codes 3.022146 and 3.022147
Documentation
Options
External cover kit with acoustical insulation for ZENITAIR-MONO
Cod.3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
Options
HYDRO 3 V2
Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Documentation
Options
HYDRO 4 V2
Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Options
HYDRO FS 200
Cod.3.028500
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 400
Cod.3.028501
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 600
Cod.3.028502
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 800
Cod.3.028503
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 1000
Cod.3.028505
Floor standing hydronic fancoil
Documentation
Options
INOXSTOR 200 V2
Cod.3.027746
INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Documentation
Options
OMNISTOR 300
Cod.3.027910
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
OMNISTOR 500
Cod.3.027911
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
Vertical buffer tank with capacity of 50 litres
Cod.3.027539
Documentation
Options
Vertical inertial storage tank 75 litre
Cod.3.027288
Wall-hung (with bracket option kit) or floor-standing installation.
Documentation
Options
ZENITAIR MONO
Cod.3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
Documentation
Options
HYDRO 3 V2
Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Documentation
Options
HYDRO 4 V2
Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Options
HYDRO FS 200
Cod.3.028500
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 400
Cod.3.028501
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 600
Cod.3.028502
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 800
Cod.3.028503
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 1000
Cod.3.028505
Floor standing hydronic fancoil
Documentation
Options
Probe kit for PT 1000 solar collector
Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Options
Probe kit for PT 1000 solar collector
Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
