IT / EN
Skip to Content
MAGIS M12
Hydronic monobloc single-phase heat pumps
Code 3.032375
Heating output kW 11,70
Cooling output kW 12,00
Dimensions (HxWxD) mm 865 x 1385 x 526
Refrigerant gas R32
COP 4,95
EER 3,95
Weight (kg) 129

A++

A+++

Hydronic monobloc single-phase heat pumps
• Pre-loaded refrigerant fluid R32;
• Remote control panel (with chronothermostat function) as standard;
• Including external probe, condensate discharge fitting, “Y” filter, 3 bar valve, 8 litres D.H.W. expansion vessel, low consumption pump system; probe to manage D.H.W. or 2nd mixed zone heating set point till 65°C
• Possibillity to realize integrated system (MAGIS M + gas boiler) with system controller
• Possibility to manage 1 zone heating/cooling, 1 zone only heating and 1 mixing valve
• Photovoltaic contact/Smart Grid
• Simple and multiple cascade

Ideal for new buildings
Standard thermoregulation
Heating and cooling
Thermoregulation
Remote control kit       Code 3.023364
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3% or 4%*
 
* as standard
System controller       Code 3.021522
Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
 
* as standard
Remote Control Panel       Code 3.030863
Modulating chronotermostat, remote control with temperature/humidity sensor

Temperature control class V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
 
* default settings
Temperature/humidity active sensor kit       Code 3.021524

To be used with radiant systems that also work in cooling mode.

Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*

* as standard

Room hygrostat       Code 3.023302

To be used with radiant systems that also work in cooling mode.

System controller expansion kit       Code 3.021547

 

 

System controller expansion kit       Code 3.021547

 

 

External probe    Code 3.015266

To be used when external probe as standard in outdoor unit is not correctly exposed.


Temperature control class II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4 or 3,5%

* default settings

CRONO 7 (weekly digital chronothermostat)       Code 3.021622

ON/OFF room thermostat.

 

Class of device IV* or VII

Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%

* default settings

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)       Code 3.021624

ON/OFF room thermostat.

 

Class of device IV* or VII

Contribution to the environmental heating energy efficiency 2%* or 3,5%

* default settings

EMR 12 VDC relay kit       Code 3.023945

only for system controller

Probe kit for MAGIS M4-30      Code 3.033324

To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.

SSR 6 VDC relay kit       Code 3.023946

only for system controller

Storage tank NTC probe       Code 3.019375

Allows to check the DHW temperature of a Storage Tank Unit or puffer 
Provided as per standard on all Storage Tank Units in the catalogue.

Low temperature safety kit       Cod. 3.013794

Dedicated to MAGIS COMBO PLUS V2 in recessed solutions, MAGIS PRO V2, TRIO PACK, TRIO HYDRO, DIM 2/3 ZONE ErP or to kit code no. 3.021527 and 3.021528 (to be installed on the delivery manifold), HERCULES CONDENSING and HERCULES SOLAR 

 

 

Solar collector probe       Code 3.019374
To be used to manage the solar system coupled to thermal plants using the cascade and zone regulator.
Solar collector probe       Code 3.019374
To be used to manage the solar system coupled to thermal plants using the cascade and zone regulator.
Flue systems
Options
HYDRO IN 200     Code 3.029841
Wall and ceiling built-in hydronic fancoil
 
 
 
HYDRO IN 600    Code 3.029843
Wall and ceiling built-in hydronic fancoil
 
 
 
ZENITAIR MONO     Code 3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
 
 
 
 
Distribution manifold kit for 1 direct and 2 mixed temperature zones      Code 3.021527
The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each mixed delivery.
Wall-hung or recessed installation. Low consumption pumps.
HYDRO FS 200     Code 3.028500
Floor standing hydronic fancoil 
 
 
 
External cover kit with acoustical insulation for ZENITAIR-MONO    Code 3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
 
 
 
 
HYDRO 3     Code 3.027918
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 
HYDRO IN 400     Code 3.029842
Wall and ceiling built-in hydronic fancoil
 
 
 
HYDRO IN 1000     Code 3.029845
Wall and ceiling built-in hydronic fancoil
 
 
 
HYDRO IN 800     Code 3.029844
Wall and ceiling built-in hydronic fancoil
 
 
 
HYDRO 4     Code 3.027919
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard 
HYDRO FS 400     Code 3.028501
Floor standing hydronic fancoil
 
Distribution manifold kit for 2 mixed temperature zones     Code 3.021528
The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each delivery.
Wall-hung or recessed installation. Low consumption pumps.
HYDRO FS 600     Code 3.028502
Floor standing hydronic fancoil 
 
 
Dehumidifier kit     Code 3.021529
Only for recessed installation with codes 3.022146 and 3.022147

 

HYDRO FS 800     Code 3.028503
Floor standing hydronic fancoil 
 
 
Dehumidifier back frame kit     Code 3.022146
HYDRO FS 1000     Code 3.028505
Floor standing hydronic fancoil 
 
Dehumidifier front grille kit     Code 3.022147
12 litre system expansion vessel kit     Code 3.011679
for plants with MAGIS M.
INOXSTOR 200 V2       Code 3.027746
INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Integration electric resistance kit 2, 4 or 6 kW for heating system     Code 3.021525

For internal installation

OMNISTOR 500       Code 3.027911
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
INOXSTOR 300 V2       Code 3.027747
INOXSTOR 300 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750     Code 3.020862

Power supply 230 or 400 Vac.

OMNISTOR 300       Code 3.027910
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Additional 2 kW electric resistance kit for OMNISTOR, INOXSTOR V2 and UB 550/750     Code 3.020861

Power supply 230 or 400 Vac.

Connection kit with flexible pipes and shut-off knobs 1” 1/4     Code 3.032846

For MAGIS M8/12/14/16/18/22/26/30

Vertical buffer tank with capacity of 50 litres     Code 3.027539
 
 
 
Bracket kit for wall mounting 75 inertial storage tank     Code 3.027290
Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
 
Vertical inertial storage tank 75 litre  Code 3.027288
Wall-hung (with bracket option kit) or floor-standing installation.
Solar kit for OMNISTOR  Code 3.029723
Composed of: aesthetic cover frame, plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, connection insulated pipes.   
Condensate antifreeze heating cable kit       Code 3.027385

For MAGIS M and external unit of MAGIS HERCULES PRO 4 - 6 , MAGIS PRO/COMBO 4 - 6 V2,
TRIO PACK 4 - 6 and TRIO HYDRO 5

Double electronic anode kit for OMNISTOR, INOXSTOR V2 and MAGIS HERCULES PRO     Code. 3.025003
Double electronic anode kit for OMNISTOR, INOXSTOR V2 and MAGIS HERCULES PRO
3-way valve kit       Code 3.020632
Antivibration supports (3 pieces)      Code 3.032854
For MAGIS M
Thermoregulation
Flue systems
Options
Related products
MAGIS M6
Hydronic monobloc single-phase heat pumps

OPEN PRODUCT

MAGIS M8
Hydronic monobloc single-phase heat pumps

OPEN PRODUCT

MAGIS M4
Hydronic monobloc single-phase heat pumps

OPEN PRODUCT

 
CONTACT US
 
 
 
CUSTOMER CARE