The range of Immergas accessories for boilers and water heaters ensures ease of installation, all types of programming and remote control.
For TRIO PACK, TRIO HYDRO and MAGIS HERCULES PRO MINI
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
For TRIO PACK, TRIO HYDRO and MAGIS HERCULES PRO MINI/MINI EH
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
To be used when external probe as standard in outdoor unit is not correctly exposed.
Temperature control class II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4 or 3,5%
* default settings
For buildings not equipped with telephone network. Available for all Immergas models.
For generators settled up with low temperature
To be used with radiant systems that also work in cooling mode
Temperature control class V or VI*
Contribution to seasonal space heating energy efficiency
3% or 4%*
* default settings
To be used with radiant systems that also work in cooling mode.
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
For buildings equipped with telephone network. Available for all Immergas models.
To be used with radiant systems that also work in cooling mode.
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*
* as standard
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
only for system controller
To be used when external probe as standard in outdoor unit is not correctly exposed.
Temperature control class II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4 or 3,5%
* default settings
For generators settled up with low temperature
To be used with radiant systems that also work in cooling mode
Temperature control class V or VI*
Contribution to seasonal space heating energy efficiency
3% or 4%*
* default settings
To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.
To be used with radiant systems that also work in cooling mode.
only for system controller
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
To be used with radiant systems that also work in cooling mode.
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*
* as standard
La centralina solare è completa di sonde temperatura per Collettore e Unità Bollitore. Display retroilluminato.
Può essere integrata nelle Unità Bollitore UB INOX 120 V2 e UB INOX 200 V2.
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
It allows the covering of the wall hole for electrical boxes type 503.
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
For generators settled up with low temperature
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
Temperature control class: V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
*default settings.
For HERCULES Condensing and HERCULES Solar.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
For buildings equipped with telephone network. Available for all Immergas models.
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
It can manage 3 water distribution zones plus an external storage tank unit
and thermal solar for DHW production, both in standalone and cascade
configurations. It includes power supply connection for installation on a DIN
rail.
To be used together with Cascade and Zones regulator kit (1 for each boiler).
To be used to manage 1 additional zone (direct or mixed) up to a maximum
of 5.
To be used when external probe as standard in outdoor unit is not correctly exposed.
Temperature control class II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4 or 3,5%
* default settings
To be located on the delivery side of the plant, after the hydraulic
separator, it allows the cascade and zone regulator to manage the
delivery temperature of the plant or of the mixed zones available
For buildings not equipped with telephone network. Available for all Immergas models.
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.
This is a modulating control unit that serves to optimize climatic management of the temperature in rooms. It can only be used on systems with a single temperature control.
Connected to the boiler board, it measures the delivery temperature after the hydraulic manifold.
Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.
Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.
For buildings equipped with telephone network. Available for all Immergas models.
To match VICTRIX SUPERIOR 35 PLUS and VICTRIX TERA 35 PLUS V2 EU in cascade
Electric interface Gas boiler-Cascade and zones regulator kit; it is necessary one interface each gas boiler.
If the cascade and zone regolator is not install inside an electrical box.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
It allows the covering of the wall hole for electrical boxes type 503.
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
To be located on the delivery side of the plant, after the hydraulic
separator, it allows the cascade and zone regulator to manage the
delivery temperature of the plant or of the mixed zones available
For buildings not equipped with telephone network. Available for all Immergas models.
For generators settled up with low temperature
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.
It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).
For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
Temperature control class: V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
*default settings.
For HERCULES Condensing and HERCULES Solar.
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.
For buildings equipped with telephone network. Available for all Immergas models.
Ideal for reading the room temperature of second or third zone.
To be matched to sensor receiver code 3.030908.
Product class V* or VI
Seasonal energy efficiency value 3%* or 4%
*as standard
Product class V* or VI
Seasonal energy efficiency value 3%* or 4%
*as standard
Control unit for external circulators/zone valves to manage 3 zones (2 mixed and 1 direct).
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%
* default settings
ON/OFF room thermostat.
Class of device IV* or VII
Contribution to the environmental heating energy efficiency 2%* or 3,5%
* default settings
It allows the covering of the wall hole for electrical boxes type 503.
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
For buildings not equipped with telephone network. Available for all Immergas models.
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
Temperature control class: V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
*default settings.
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
For buildings equipped with telephone network. Available for all Immergas models.
To be provided in combination with the smart touch wall controller with temperature probe code 3.030877 and 3.030878; it is installed inside the fan coil and allows the engine to be operated with continuous modulating operation.
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
For condensing boiler < 35 kW.
for VICTRIX PRO 35/55/60/68/80 V2
Flexible chimney ducting system for condensing boilers.
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
Flexible chimney ducting system for condensing boilers.
Max lenght 12,9 m.
For condensing boiler < 35 kW.
for condensing boilers < 35 kW.
for condensing boilers < 35 kW.
For external installations, in partially protected places
For external installations, in partially protected places
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
To be used with the concentric kits.
For condensing boiler < 35 kW.
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
L=12 m + 4 centering spacers.
For condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
For condensing boilers.
Per modelli non omologati per esterno e aspirazione diretta dell'aria da locale tecnico d'installazione.
Per ARES CONDENSING 32 ErP e gamma HERCULES ErP.
Max lenght 11,9 m.
For condensing boiler < 35 kW.
for condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boilers.
For condensing boilers.
For condensing boiler < 35 kW.
For condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
for RAPAX 200/300 V3 and 200/300 SOL V3
for RAPAX 200/300 V3 and 200/300 SOL V3
For RAPAX 100 V2
For RAPAX 100 V2
Composed by:
• n.2 White polyethylene insulation layer, thickness 5 mm for pipe Ø 125 mm
L. 1000 mm
• n.4 White polyethylene insulation layer, thickness 5 mm for bend Ø 125 mm
• n.1 White polyethylene tape 2x70x4000 mm
For RAPAX 200/300 V3 and 200/300 SOL V3
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
For condensing boiler < 35 kW.
for VICTRIX PRO 35/55/60/68/80 V2
Flexible chimney ducting system for condensing boilers.
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
Flexible chimney ducting system for condensing boilers.
Max lenght 12,9 m.
For condensing boiler < 35 kW.
for condensing boilers < 35 kW.
for condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
To be used with the concentric kits.
For condensing boiler < 35 kW.
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
L=12 m + 4 centering spacers.
For condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
For condensing boilers.
Per modelli non omologati per esterno e aspirazione diretta dell'aria da locale tecnico d'installazione.
Per ARES CONDENSING 32 ErP e gamma HERCULES ErP.
Max lenght 11,9 m.
For condensing boiler < 35 kW.
for condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boilers.
For condensing boilers.
For condensing boiler < 35 kW.
For condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
for RAPAX 200/300 V3 and 200/300 SOL V3
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 100/120/150 V2
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
Cascade installation - "Green Series" exhaust manifolds.
With installations in central heating systems, using up to 5 units in the battery, in configuration open chamber fan assisted, Immergas supplies special exhaust manifolds in PP equipped with flue lock (mechanical shutters), to prevent backflow of combustion products through the other non-functioning boilers.
The system is modular: there is an exhaust manifold kit for two boilers and one for additional boilers.
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 100/120/150 V2
For RAPAX 100 V2
For installations in central heating systems with VICTRIX PRO.
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35-55-68-80 ErP.
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 100-120 ErP.
for VICTRIX PRO 100/120/150 V2
for VICTRIX PRO 35/55/60/68/80 V2 (to discharge horizontally)
for VICTRIX PRO 35/55/60/68/80 V2 (to discharge in the chimney)
for VICTRIX PRO 100/120/150 V2 (to discharge in the chimney)
for VICTRIX PRO 100/120/150 V2 (to discharge horizontally)
For condensing boiler < 35 kW.
For installations in central heating systems with VICTRIX PRO.
For installations in central heating systems with VICTRIX PRO.
for air intake for VICTRIX PRO 35/55/60/68/80 V2 with B23 configuration
for air intake for VICTRIX PRO 100/120/150 V2 with
B23 configuration
For condensing boilers.
For condensing boilers.
For condensing boiler < 35 kW.
for VICTRIX PRO 100/120/150 V2 (color RAL 9010)
for VICTRIX PRO 35/55/60/68/80 V2
(black coloured, with converse for pitched roofs)
for VICTRIX PRO 100/120/150 V2
(black coloured, with converse for pitched roofs)
For condensing boilers.
VICTRIX PRO 35/55/60/68/80 V2 (to discharge at roof)
VICTRIX PRO 100/120/150 V2 (to discharge at roof)
(stainless steel) VICTRIX PRO 35/55/60/68/80 V2
(for outdoor) length 0.55m
Technical note: size is not adjustable
(stainless steel)
VICTRIX PRO 100/120/150 V2
(for outdoor) length 1m
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
For condensing boiler < 35 kW.
for VICTRIX PRO 35/55/60/68/80 V2
for VICTRIX PRO 35/55/60/68/80 V2
Flexible chimney ducting system for condensing boilers.
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
for VICTRIX ZEUS SUPERIOR and VICTRIX SUPERIOR
Flexible chimney ducting system for condensing boilers.
Max lenght 12,9 m.
For condensing boiler < 35 kW.
for condensing boilers < 35 kW.
for condensing boilers < 35 kW.
For external installations, in partially protected places
For external installations, in partially protected places
For condensing boiler < 35 kW.
For condensing boiler < 35 kW.
for VICTRIX PRO 35/55/60/68/80 V2
To be used with the concentric kits.
For condensing boiler < 35 kW.
For condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
L=12 m + 4 centering spacers.
For condensing boilers.
Flexible chimney ducting system for condensing boilers.
Flexible chimney ducting system for condensing boilers.
For condensing boilers.
Per modelli non omologati per esterno e aspirazione diretta dell'aria da locale tecnico d'installazione.
Per ARES CONDENSING 32 ErP e gamma HERCULES ErP.
Max lenght 11,9 m.
For condensing boiler < 35 kW.
for VICTRIX PRO 35-55-68-80 ErP.
for condensing boilers < 35 kW.
For condensing boiler < 35 kW.
For condensing boilers.
For condensing boilers.
For condensing boiler < 35 kW.
For condensing boilers.
Flexible chimney ducting system for condensing boilers.
(stainless steel) VICTRIX PRO 35/55/60/68/80 V2
(for outdoor) length 0.55m
Technical note: size is not adjustable
Flexible chimney ducting system for condensing boilers.
For MAGIS PRO 12-14-16 V2 and MAGIS COMBO/PLUS 12-14-16 V2
Installabile all'interno di MAGIS HERCULES ErP, il kit comprende circolatore a basso consumo, valvola miscelatrice, espansione e relè terza zona.
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.
For MAGIS HERCULES ErP.
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 1100 x 495
To be used to manage the recirculation pump.
For floor standing boilers: compact condensate drain pump kit.
For wall-hung boilers: compact condensate drain pump kit.
For connection R32 toward the lower part of the Container
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
For MAGIS M4 and 6
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 1160 x 520
Kit to be used without system manager controller.
Dedicated to MAGIS PRO V2 4-6-9, MAGIS COMBO V2 4-6-9 and MAGIS HERCULES PRO MINI/EH.
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH and MAGIS COMBO V2 4-6-9
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH and MAGIS COMBO V2 4-6-9.
For 2 direct zones (only heating)
Suitable to install it under external unit it is necessary adapter kit code 3.030915
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
To be installed inside MAGIS HERCULES ErP, to separate AUDAX TOP ErP from the boiler.
Low consumption pump and connection pipes as standard.
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
It's possible install this kit inside MAGIS HERCULES.
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Recessed frame for solutions MAGIS COMBO PLUS.
is the first of the main components of MAGIS COMBO PLUS with SOLAR CONTAINER COMBO solutions.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 430
For wall-hung outdoor boilers.
Installabile all'interno di MAGIS HERCULES ErP.
For outdoor unit of VICTRIX HYBRID.
For outdoor unit of MAGIS COMBO 4-6-9 V2/ 4-6-9 PLUS V2, MAGIS COMBO 12-14-16 V2/ 12-14-16 PLUS V2, TRIO PACK 4-6-9, TRIO HYDRO 5-8-12, MAGIS HERCULES PRO 4-6-9-12-14-16, MAGIS PRO 4-6-9 V2 /12-14-16 V2, MAGIS HERCULES PRO MINI 6-9/6-9 EU.
For wall-hung condensing boilers.
For MAGIS PRO 12-14-16 V2 and MAGIS COMBO/PLUS 12-14-16 V2
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
For MAGIS HERCULES PRO and MAGIS HERCULES PRO MINI.
For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing
For TRIO PACK ELECTRIC-TRIO HYDRO system ELECTRIC.
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
Power supply 230 or 400 Vac.
Power supply 230 or 400 Vac.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
To be installed inside the casing.
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 1100 x 495
for MAGIS HERCULES PRO 4-6-9
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
for MAGIS HERCULES PRO 12-14-16
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
For connection R32 toward the lower part of the Container
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
For MAGIS M4 and 6
For MAGIS M8/12/14/16/18/22/26/30
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 1160 x 520
Kit to be used without system manager controller.
Dedicated to MAGIS PRO V2 4-6-9, MAGIS COMBO V2 4-6-9 and MAGIS HERCULES PRO MINI/EH.
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH and MAGIS COMBO V2 4-6-9
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH and MAGIS COMBO V2 4-6-9.
For 2 direct zones (only heating)
For internal installation
For MAGIS HERCULES PRO MINI
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
To be installed inside the MAGIS HERCULES PRO internal unit casing
To be installed inside the MAGIS HERCULES PRO MINI internal unit casing
for MAGIS HERCULES PRO MINI
To connect gas fittings to the rear wall
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Shut off knobs, 1" connections (for zones 2 and 3 only).
Shut off knobs with filters
1" connections (for zones 2 and 3, only); standard for zone 1.
For MAGIS HERCULES PRO.
Composed by: plate heat exchanger, single solar pump
station (with low consumption circulation pump), solar
central unit, connection pipes,18 litre solar expansion vessel,
temperature probes (for collectors and storage tank).
N.B.: For solar panel and other solar accessories see the
solar catalogue.
For MAGIS HERCULES PRO MINI.
Composed by: plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, shut off knobs, connection pipes, mixing valve, 18 litre solar expansion vessel, temperature probes (for collectors and storage tank).
For outdoor unit of MAGIS COMBO 4-6-9 V2/ 4-6-9 PLUS V2, MAGIS COMBO 12-14-16 V2/ 12-14-16 PLUS V2, TRIO PACK 4-6-9, TRIO HYDRO 5-8-12, MAGIS HERCULES PRO 4-6-9-12-14-16, MAGIS PRO 4-6-9 V2 /12-14-16 V2, MAGIS HERCULES PRO MINI 6-9/6-9 EU.
Power supply 230 or 400 Vac.
Power supply 230 or 400 Vac.
(for external temperatures from 0 °C to -13 °C).
For SOLARSMART.
Per due UB INOX 120 V2 o due UB INOX 200 V2 in parallelo.
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
Setted at 6 bar and 94 °C.
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Connection ¾". Including safety and exhaust valves with
4,5 ± 0,5 bar setting; check valve; cutoff cock and drain trap.
For SOLARSMART.
Including pipes and fittings for connection in template.
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
Combined Storage Tank Unit for heating and domestic hot water integration.
The 295 litres Storage Tank Unit is equipped with two concentric coil shaped stainless steel water to water heat exchangers, one of them dedicated to DHW production and the other one fit for energy integration, in case of coupling with solar collector or another energy source.Polyurethane (PU) rigid insulation thick 70 mm (which can bedisassembled in case of necessity).The standard anodic protection system is given by two magnesium anodes, one of them placed in the upper part of the storage and the other inserted in the bottom, close to the flange.
This solution can be easily integrated with its own optional kit.
UB 3000 V2 body is pre-arranged to fix double pump station and to insert electric resistance kit.
Ideal solution for single-family homes, storage tank unit has 5 years conventional warranty.
Modulating low consumption pumps.
Modulating low consumption pumps.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER.
Il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per HERCULES SOLAR 200 CONDENSING.
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
For floor standing boilers: compact condensate drain pump kit.
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Modulating low consumption pump.
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
For HERCULES SOLAR 26 ErP
For alignment of solar circuit in template.
To consider in addition to extra pellet tank.
Combined Storage Tank Unit for heating and domestic hot water integration.
The 295 litres Storage Tank Unit is equipped with two concentric coil shaped stainless steel water to water heat exchangers, one of them dedicated to DHW production and the other one fit for energy integration, in case of coupling with solar collector or another energy source.Polyurethane (PU) rigid insulation thick 70 mm (which can bedisassembled in case of necessity).The standard anodic protection system is given by two magnesium anodes, one of them placed in the upper part of the storage and the other inserted in the bottom, close to the flange.
This solution can be easily integrated with its own optional kit.
UB 3000 V2 body is pre-arranged to fix double pump station and to insert electric resistance kit.
Ideal solution for single-family homes, storage tank unit has 5 years conventional warranty.
Usable in outdoor installations for minimum temperature as low as -15 °C.
With grains.
Complete recharge for condensate neutralizer kit (cod. 3.023662).
To install inside the cabinet kit.
To be mainly used when the pump is independently dimensioned by the designer.
To be mainly used when the pump is independently dimensioned by the designer.
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
Floor-standing cabinet, it can be installed outdoor.
Floor-standing cabinet, it can be installed outdoor.
Floor-standing cabinet, it can be installed outdoor.
Floor-standing cabinet, it can be installed outdoor.
Modulating low consumption pumps.
For VICTRIX SUPERIOR.
Modulating low consumption pumps.
Modulating low consumption pump.
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24
For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.
Aestethics frame (250 mm height, 407 mm depth) that covers connections zone and the main option kits
Aesthetic frame (240 mm height) that covers connections zone and the main
option kits for wall-hung condensing boilers IDEAL FOR REPLACEMENT
for VICTRIX SUPERIOR
For VICTRIX ZEUS 25-32.
To be used to manage the recirculation pump.
For floor standing boilers: compact condensate drain pump kit.
For wall-hung boilers: compact condensate drain pump kit.
For the installation of heating only boilers.
Per configurazione tipo "B23".
Per funzionamento in luoghi parzialmente protetti.
Per VICTRIX EXA.
For external installations, in partially protected places
For partially protected area installation
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Modulating low consumption pump.
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Only probe pipe, pump is not included.
Available for VICTRIX Zeus Superior kW.
Only probe pipe, not pump included.
Available for VICTRIX Zeus.
For wall-hung outdoor boilers.
It includes pipes and fittings. For connecting 1 Flat-Plate or Vacuum Collector.
It must be used coupled with the typical BASIC SOL TOP and BASIC SOL LUX TOP packs.
Storage tank connection kit for VICTRIX X TT ErP, VICTRIX EXA 24 X ErP, VICTRIX X TT and VICTRIX MAIOR 35 X TT ErP.
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
For wall-hung condensing boilers.
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
Available for: MAIOR EOLO, NIKE Mini 28 kW Special and MINI NIKE/EOLO.
Per apparecchi posti all'interno degli edifici o in OMNI CONTAINER, il dosatore di polifosfati è l'optional che consente di rispettare le condizioni imposte dal Decreto Interministeriale 26 Giugno 2015. Tale decreto prevede obbligatoriamente per gli impianti destinati alla produzione di acqua calda sanitaria il trattamento dell'acqua (trattamento chimico di condizionamento o di addolcimento) nei casi in cui la durezza sia oltre i 15 gradi francesi.
Kit per AVIO 24 ErP.
To be used to manage the recirculation pump.
for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Only probe pipe, not pump included.
Available for VICTRIX Zeus.
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming from the terminal, towards the nozzle placed at right angles to the air outlet.
For outdoor unit of MAGIS COMBO 4-6-9 V2/ 4-6-9 PLUS V2, MAGIS COMBO 12-14-16 V2/ 12-14-16 PLUS V2, TRIO PACK 4-6-9, TRIO HYDRO 5-8-12, MAGIS HERCULES PRO 4-6-9-12-14-16, MAGIS PRO 4-6-9 V2 /12-14-16 V2, MAGIS HERCULES PRO MINI 6-9/6-9 EU.
Ho preso visione dell'informativa sulla privacy e presto il consenso all'invio della Newsletter da parte di Immergas S.p.A
