IT / EN
Skip to Content
VICTRIX HYBRID
Hybrid heat pump
Code 3.030698
Heat pump heat output C.H. kW 3,98
Gas boiler heat output C.H. kW 24,1
Heat pump dimensions (HxWxD) mm 745 x 845 x 350
Gas boiler dimensions (HxWxD) mm 748 x 440 x 268
Refrigerant gas R32
D.H.W. production (∆t 30°C) l/min 13,7

A++

A

Solution for winter heating only and production of domestic hot water, designed for rise energy efficiency in the replacement of old generators also on heating systems up to 80 °C. Composed of a monobloc heat pump and a condensing boiler, connected in series.
• Instantaneous domestic hot water production (only with internal condensing unit)
• Remote control panel (with chronothermostat function) as standard
• Buffer tank necessary only for systems with water content less than 20 litres
• As standard in the external unit: external probe, anti-vibration supports, filter, shut-off knobs and antifreeze thermostatic valve that avoids glycol
insertion in the system
• Internal condensing unit approved also for installation in partially protected place

Ideal for replacement
Low pollutant emissions
Standard thermoregulation
Night-time energy
Electric mobility
Thermoregulation
CRONO 7 (weekly digital chronothermostat)       Code 3.021622

ON/OFF room thermostat.

 

Class of device IV* or VII

Contribution to the environmental heating seasonal energy efficiency 2%* or 3,5%

* default settings

CRONO 7 WIRELESS (wireless weekly digital chronothermostat)       Code 3.021624

ON/OFF room thermostat.

 

Class of device IV* or VII

Contribution to the environmental heating energy efficiency 2%* or 3,5%

* default settings

GSM telephonic control       Code 3.017182

For buildings not equipped with telephone network. Available for all Immergas models.

Telephonic control       Code 3.013305

For buildings equipped with telephone network. Available for all Immergas models.

Solar probe kit       Code 3.021452
For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP,  NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
 
Flue systems
Options
ZENITAIR MONO     Code 3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
 
 
 
 
Condensate antifreeze heating cable kit for external unit      Code 3.030930
Suitable to extend external unit antifreeze protection up to -15 °C.
Horizontal buffer tank with capacity of 25 litres      Code 3.027842

Suitable to install it under external unit it is necessary adapter kit code 3.030915

INOXSTOR 200 V2       Code 3.027746
INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
OMNISTOR 500       Code 3.027911
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
INOXSTOR 300 V2       Code 3.027747
INOXSTOR 300 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
OMNISTOR 300       Code 3.027910
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Wall mounting brackets for external unit   Code 3.022154
Solar kit for OMNISTOR  Code 3.029723
Composed of: aesthetic cover frame, plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, connection insulated pipes.   
Anti freeze protection kit -15 °C        Code 3.017324

Anti freeze protection kit -15 °C  
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.

Magnetic cyclone filter kit       Code 3.024176

Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).

Available for wall-hung condensing boilers.

2 litres additional expansion vessel       Code 3.017514
Available for: VICTRIX, VICTRIX X.
Condensate neutralizer kit   Code 3.019857
Necessary to neutralize the acidity of the condensation. Inclusive of granulate.
Shut off knobs       Code 3.5324

For wall-hung outdoor boilers.

 

 

All-purpose connection kit for wall-hung combi boilers       Code 3.011667

For wall-hung combi boilers and also for wall-hung with built-in storage tank.

Double electronic anode kit for OMNISTOR, INOXSTOR V2 and MAGIS HERCULES PRO     Code. 3.025003
Double electronic anode kit for OMNISTOR, INOXSTOR V2 and MAGIS HERCULES PRO
Anti-scale kit for VICTRIX SUPERIOR, MAIOR TT, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2      Code 3.017323

For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.

Condensate discharge pump kit      Code 3.026374

For wall-hung boilers: compact condensate drain pump kit.

kit containing bottom guard for condensing boilers      Code 3.027341

For wall-hung condensing boilers.

Thermoregulation
Flue systems
Options
Related products
VICTRIX HYBRID PLUS
Hybrid heat pump combinable with storage tank

OPEN PRODUCT

 
GARANZIE E AGEVOLAZIONI
 
5 ANNI DI GARANZIA
UNA GRANDE SICUREZZA IN PIÙ

5 anni di estensione di garanzia per pompe di calore e sistemi ibridi Immergas con garanzia di intervento di Centri Assistenza certificati F-Gas.

 
10 ANNI DI GARANZIA
CON ATTIVAZIONE GRATUITA

Tutte le caldaie con potenza inferiore a 35 kW, possono avere 10 anni di garanzia senza costi di attivazione. In più l’estensione può arrivare fino a 15 anni.

 
5 ANNI DI GARANZIA
PIÙ SICUREZZA PER GRANDI IMPIANTI

5 anni di estensione di garanzia per le caldaie di Alta Potenza Immergas tra 36 e 200 kW destinate agli impianti più grandi.

 
RATE COMODE
E RISPARMIO IMMEDIATO

La qualità Immergas anche a rate: dalle caldaie a condensazione agli impianti con energie rinnovabili.

 
AGEVOLAZIONI FISCALI

Detrazioni e incentivi permettono di avere la qualità Immergas in modo più conveniente anche nel 2020. Tutte le soluzioni da scegliere in vigore.

 
 
CONTACTS
 
CONTACT US
 
 
 
CERCA ASSISTENZA
 
 
 
 
CERCA AGENZIE DI VENDITA