Thermoregulation
- Thermoregulation
- Options
- Corporate
- Products
Products- Hybrid systems
- Hybrid systems
- Whole range
- Thermoregulation
- Heat Pumps
- Heat Pumps
- Whole range
- Water heaters
- Thermoregulation
- Fancoil units
- Thermal solar system
- Thermal solar system
- Whole range
- Packs
- Individual components
- Solar ready solutions
- Boilers
- Storage tanks
- Optionals
- Optionals
- Whole range
- Thermoregulation
- Flue systems
- Options
- Hybrid systems
- Press area
Optionals MAGIS PRO 16 V2
The range of Immergas accessories ensures ease of installation, all types of programming and remote control.
Optionals, one by one
Filters
Thermoregulation
2 relays board kit
Cod.3.026302
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
DOMINUS V2 interface kit
Cod.3.034903
For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range.
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).
Documentation
Thermoregulation
External probe
Cod.3.015266
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
Documentation
Thermoregulation
Low temperature safety thermostat kit
Cod.3.019229
For generators settled up with low temperature
Documentation
Thermoregulation
Mod-bus temperature and humidity sensor
Cod.3.030992
To be used with radiant systems that also work in cooling mode
Documentation
Thermoregulation
Relay board kit
Cod.3.015350
Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2
Documentation
Thermoregulation
Remote Control Panel
Cod.3.030863
Modulating chronotermostat, remote control with temperature/humidity sensor
Documentation
Thermoregulation
Room hygrostat
Cod.3.023302
To be used with radiant systems that also work in cooling mode.
Documentation
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Thermoregulation
System controller
Cod.3.021522
Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
* as standard
Documentation
Thermoregulation
System delivery probe kit
Cod.3.030913
Documentation
Thermoregulation
2 relays board kit
Cod.3.026302
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
DOMINUS V2 interface kit
Cod.3.034903
For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range.
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).
Documentation
Thermoregulation
External probe
Cod.3.015266
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
Documentation
Thermoregulation
Low temperature safety thermostat kit
Cod.3.019229
For generators settled up with low temperature
Documentation
Thermoregulation
Mod-bus temperature and humidity sensor
Cod.3.030992
To be used with radiant systems that also work in cooling mode
Documentation
Thermoregulation
Relay board kit
Cod.3.015350
Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2
Documentation
Thermoregulation
Remote Control Panel
Cod.3.030863
Modulating chronotermostat, remote control with temperature/humidity sensor
Documentation
Thermoregulation
Room hygrostat
Cod.3.023302
To be used with radiant systems that also work in cooling mode.
Documentation
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Thermoregulation
System controller
Cod.3.021522
Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
* as standard
Documentation
Thermoregulation
System delivery probe kit
Cod.3.030913
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
Relay board kit
Cod.3.015350
Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
DOMINUS V2 interface kit
Cod.3.034903
For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range.
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).
Documentation
Thermoregulation
Low temperature safety thermostat kit
Cod.3.019229
For generators settled up with low temperature
Documentation
Thermoregulation
Relay board kit
Cod.3.015350
Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2
Documentation
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Thermoregulation
System delivery probe kit
Cod.3.030913
Documentation
Thermoregulation
Zone control unit V2 kit
Cod.3.030912
Control unit for external circulators/zone valves to manage 3 zones (2 mixed and 1 direct).
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
Low temperature safety thermostat kit
Cod.3.019229
For generators settled up with low temperature
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
External probe
Cod.3.015266
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
Documentation
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Options
2 zones kit (1 mixed and 1 direct)
Cod.3.031695
For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2 and MAGIS HERCULES MINI HYDRO 12
Documentation
Options
3 kW integration electric resistance kit for MAGIS PRO V2
Cod.3.030991
For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing
Documentation
Options
3-way valve kit
Cod.3.020632
Documentation
Options
Additional 2 kW electric resistance kit for OMNISTOR, INOXSTOR V2 and UB 550/750
Cod.3.020861
Power supply 230 or 400 Vac.
Documentation
Options
Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750
Cod.3.020862
Power supply 230 or 400 Vac.
Documentation
Options
Anti freeze protection kit -15 °C
Cod.3.017324
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
Connection kit for R410A circuit
Cod.3.026089
To connect refrigerant gas circuit where internal unit of MAGIS COMBO/PLUS 12-14-16 V2 e MAGIS PRO 12-14-16 V2 is installed to the wall
Documentation
Options
Dehumidifier back frame kit
Cod.3.022146
Options
Dehumidifier front grille kit
Cod.3.022147
Options
Dehumidifier kit
Cod.3.021529
Only for recessed installation with codes 3.022146 and 3.022147
Documentation
Options
Double electronic anode kit
Cod.3.025003
For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
Documentation
Options
External cover kit with acoustical insulation for ZENITAIR-MONO
Cod.3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
Options
HYDRO 3 V2
Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Documentation
Options
HYDRO IN 200
Cod.3.029841
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO 4 V2
Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Options
HYDRO FS 200
Cod.3.028500
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 400
Cod.3.028501
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 600
Cod.3.028502
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 800
Cod.3.028503
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 1000
Cod.3.028505
Floor standing hydronic fancoil
Documentation
Options
HYDRO IN 400
Cod.3.029842
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 600
Cod.3.029843
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 800
Cod.3.029844
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 1000
Cod.3.029845
Wall and ceiling built-in hydronic fancoil
Documentation
Options
OMNISTOR 300
Cod.3.027910
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
OMNISTOR 500
Cod.3.027911
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
Vertical inertial storage tank 75 litre
Cod.3.027288
Wall-hung (with bracket option kit) or floor-standing installation.
Documentation
Options
Wall mounting brackets for external unit
Cod.3.034758
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
Documentation
Options
ZENITAIR MONO
Cod.3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
Documentation
Options
2 zones kit (1 mixed and 1 direct)
Cod.3.031695
For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2 and MAGIS HERCULES MINI HYDRO 12
Documentation
Options
3-way valve kit
Cod.3.020632
Documentation
Options
Anti freeze protection kit -15 °C
Cod.3.017324
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
Connection kit for R410A circuit
Cod.3.026089
To connect refrigerant gas circuit where internal unit of MAGIS COMBO/PLUS 12-14-16 V2 e MAGIS PRO 12-14-16 V2 is installed to the wall
Documentation
Options
Dehumidifier back frame kit
Cod.3.022146
Options
Dehumidifier front grille kit
Cod.3.022147
Options
Dehumidifier kit
Cod.3.021529
Only for recessed installation with codes 3.022146 and 3.022147
Documentation
Options
External cover kit with acoustical insulation for ZENITAIR-MONO
Cod.3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
Options
HYDRO 3 V2
Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Documentation
Options
HYDRO IN 200
Cod.3.029841
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO 4 V2
Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Options
HYDRO FS 200
Cod.3.028500
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 400
Cod.3.028501
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 600
Cod.3.028502
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 800
Cod.3.028503
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 1000
Cod.3.028505
Floor standing hydronic fancoil
Documentation
Options
HYDRO IN 400
Cod.3.029842
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 600
Cod.3.029843
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 800
Cod.3.029844
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 1000
Cod.3.029845
Wall and ceiling built-in hydronic fancoil
Documentation
Options
OMNISTOR 300
Cod.3.027910
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
OMNISTOR 500
Cod.3.027911
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
Vertical inertial storage tank 75 litre
Cod.3.027288
Wall-hung (with bracket option kit) or floor-standing installation.
Documentation
Options
Wall mounting brackets for external unit
Cod.3.034758
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
Documentation
Options
ZENITAIR MONO
Cod.3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
Documentation
Options
3-way valve kit
Cod.3.020632
Documentation
Options
Additional 2 kW electric resistance kit for OMNISTOR, INOXSTOR V2 and UB 550/750
Cod.3.020861
Power supply 230 or 400 Vac.
Documentation
Options
Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750
Cod.3.020862
Power supply 230 or 400 Vac.
Documentation
Options
Double electronic anode kit
Cod.3.025003
For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
Documentation
Options
Anti freeze protection kit -15 °C
Cod.3.017324
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
Anti freeze protection kit -15 °C
Cod.3.017324
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
HYDRO 3 V2
Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Documentation
Options
HYDRO IN 200
Cod.3.029841
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO 4 V2
Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Options
HYDRO FS 200
Cod.3.028500
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 400
Cod.3.028501
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 600
Cod.3.028502
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 800
Cod.3.028503
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 1000
Cod.3.028505
Floor standing hydronic fancoil
Documentation
Options
HYDRO IN 400
Cod.3.029842
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 600
Cod.3.029843
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 800
Cod.3.029844
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 1000
Cod.3.029845
Wall and ceiling built-in hydronic fancoil
Documentation
Options
Wall mounting brackets for external unit
Cod.3.034758
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
Documentation
