Filter results by Range
Filter results by Type
- Corporate
Corporate - Products
Products- Hybrid systems
- Hybrid systems
- Whole range
- Thermoregulation
- Heat Pumps
- Heat Pumps
- Whole range
- Water heaters
- Thermoregulation
- Fancoil units
- Thermal solar system
- Thermal solar system
- Whole range
- Packs
- Individual components
- Solar system ready
- Boilers
- Storage tanks
- Optionals
- Optionals
- Whole range
- Thermoregulation
- Flue systems
- Options
- Hybrid systems
- Press area
Optionals
The range of Immergas accessories ensures ease of installation, all types of programming and remote control.
Optionals, one by one
Filters
Thermoregulation
- Thermoregulation
- Flue systems
- Options
Thermoregulation
2 relays board kit
Cod.3.031943
For TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
Documentation
Thermoregulation
2 relays board kit
Cod.3.026302
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
Documentation
Thermoregulation
CARV2 (weekly chronothermostat and modulating remote control)
Cod.3.021395
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
DOMINUS V2 interface kit
Cod.3.034903
For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range.
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).
Documentation
Thermoregulation
Expansion kit
Cod.3.031944
For TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
Documentation
Thermoregulation
External probe
Cod.3.014083
Allows at the boiler to functioning at a variable temperature according to the climatic conditions.
Available for all models, except MYTHOS HP, NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
Documentation
Thermoregulation
External probe
Cod.3.015266
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
Documentation
Thermoregulation
GSM telephonic control
Cod.3.017182
For buildings not equipped with telephone network.
Documentation
Thermoregulation
Low temperature safety thermostat kit
Cod.3.019229
For generators settled up with low temperature
Documentation
Thermoregulation
Mod-bus temperature and humidity sensor
Cod.3.030992
To be used with radiant systems that also work in cooling mode
Documentation
Thermoregulation
Relay board kit
Cod.3.015350
Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2
Documentation
Thermoregulation
Remote Control Panel
Cod.3.030863
Modulating chronotermostat, remote control with temperature/humidity sensor
Documentation
Thermoregulation
Remote control kit
Cod.3.023364
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3% or 4%*
* as standard
Documentation
Thermoregulation
Room hygrostat
Cod.3.023302
To be used with radiant systems that also work in cooling mode.
Documentation
Thermoregulation
Solar collector temperature probe kit for UB Inox Solar V2, HERCULES SOLAR 26 ErP, ARES TEC ErP, ARES PRO and MAGIS HERCULES ErP
Cod.1.028812
As per standard with these products.
Thermoregulation
Solar probe kit
Cod.3.021452
For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP, NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Thermoregulation
System controller
Cod.3.021522
Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
* as standard
Documentation
Thermoregulation
System delivery probe kit
Cod.3.030913
Documentation
Thermoregulation
Telephonic control
Cod.3.013305
For buildings equipped with telephone network.
Documentation
Thermoregulation
Temperature/humidity active sensor kit
Cod.3.021524
To be used with radiant systems that also work in cooling mode.
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*
* as standard
Documentation
Thermoregulation
2 relays board kit
Cod.3.026302
To be installed for the deumidifiers management without in absence of system manager kit.
Dedicated to MAGIS PRO V2 and MAGIS COMBO V2
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
DOMINUS V2 interface kit
Cod.3.034903
For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range.
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).
Documentation
Thermoregulation
EMR 12 VDC relay kit
Cod.3.023945
only for system controller
Thermoregulation
External probe
Cod.3.015266
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
Documentation
Thermoregulation
Low temperature safety thermostat kit
Cod.3.019229
For generators settled up with low temperature
Documentation
Thermoregulation
Mod-bus temperature and humidity sensor
Cod.3.030992
To be used with radiant systems that also work in cooling mode
Documentation
Thermoregulation
Probe kit for MAGIS M4-30
Cod.3.033324
To be used for DHW temperature control with storage tank units, for mixed zone managing or to control puffer/buffer temperature but also to manage solar plants.
Thermoregulation
Relay board kit
Cod.3.015350
Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2
Documentation
Thermoregulation
Remote Control Panel
Cod.3.030863
Modulating chronotermostat, remote control with temperature/humidity sensor
Documentation
Thermoregulation
Remote control kit
Cod.3.023364
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3% or 4%*
* as standard
Documentation
Thermoregulation
Room hygrostat
Cod.3.023302
To be used with radiant systems that also work in cooling mode.
Documentation
Thermoregulation
SSR 6 VDC relay kit
Cod.3.023946
only for system controller
Thermoregulation
Solar probe kit
Cod.3.021452
For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP, NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Thermoregulation
System controller
Cod.3.021522
Class of device VI* or VIII
Contribution to the environmental heating seasonal energy efficiency 4%* or 5%
* as standard
Documentation
Thermoregulation
System controller expansion kit
Cod.3.021547
Documentation
Thermoregulation
System controller expansion kit
Cod.3.029912
Documentation
Thermoregulation
System delivery probe kit
Cod.3.030913
Documentation
Thermoregulation
Temperature/humidity active sensor kit
Cod.3.021524
To be used with radiant systems that also work in cooling mode.
Class of device V or VI*
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%*
* as standard
Documentation
Thermoregulation
4 speeds thermoregulation kit
Cod.3.028510
includes control panel and probe NTC air.
For installation on the machine, with adjustment
speed on 4 steps.
speed on 4 steps.
Thermoregulation
Electronic control board with 0-10 V connection
Cod.3.028512
It allows to manage the fan motor, with modulating speed.
Thermoregulation
Modulating thermoregulation kit
Cod.3.028509
includes control panel with display, electronic board and NTC air probe.
For installation on the machine, allows the room
temperature adjustment using 4 types of programs:
Auto, Silent, Night and Max.
temperature adjustment using 4 types of programs:
Auto, Silent, Night and Max.
Thermoregulation
On board electronic control with PID full modulating fan
Cod.3.030876
To be provided in combination with the smart touch wall controller with temperature probe code 3.030877 and 3.030878; it is installed inside the fan coil and allows the engine to be operated with continuous modulating operation.
Thermoregulation
Smart touch wall controller with temperature probe (black casing)
Cod.3.030877
The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.
Thermoregulation
Smart touch wall controller with temperature probe (white casing)
Cod.3.030878
The kit includes control panel with PI logic and room probe for control up to 30 units.
To combine with the on board electronic control with PID full modulating fan code 3.030876.
Adjustment of temperature in hot and cold at modulating speed of the engine.
Thermoregulation
Universal control board for commercial thermoregulation
Cod.3.028511
For installation on the machine, allows to manage the fan motor, with fixed speeds.
Thermoregulation
24V Power pack kit
Cod.3.028339
To be inserted in the control panel.
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
Cascade and zone regulator kit
Cod.3.015244
ON-OFF adjustment, modulation and malfunctions of the VICTRIX PRO in cascade (max 8). It can manage any climatic zone regulators in the system (max 3 plus 1 dedicated to the hot tap water circuit).
Thermoregulation
Cascade and zone regulator kit
Cod.3.034119
It can manage 3 water distribution zones plus an external storage tank unit
and thermal solar for DHW production, both in standalone and cascade
configurations. It includes power supply connection for installation on a DIN
rail.
Documentation
Thermoregulation
Cascade regulator kit for ARES PRO - TEC ErP
Cod.3.028340
It can manage up to 8 boilers in cascade.
Composed by:
• HSCP viewer/programmer
• BCM board
• 24V power supply
• external probe
• puffer probe
Composed by:
• HSCP viewer/programmer
• BCM board
• 24V power supply
• external probe
• puffer probe
Thermoregulation
Clip-in for VICTRIX PRO V2
Cod.3.034122
To be used together with Cascade and Zones regulator kit (1 for each boiler).
Documentation
Thermoregulation
Expansion kit for Cascade and Zones regulator kit
Cod.3.034124
To be used to manage 1 additional zone (direct or mixed) up to a maximum
of 5.
Documentation
Thermoregulation
External probe
Cod.3.015266
For single installation of VICTRIX PRO V2.
For MAGIS COMBO V2, MAGIS PRO V2, MAGIS COMBO PLUS V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI/EH, MAGIS HERCULES MINI HYDRO, TRIO PACK ELECTRIC, TRIO HYDRO system ELECTRIC and MAGIS M/EH.
Documentation
Thermoregulation
External probe kit (for cascade installation)
Cod.3.024511
Paired with cascade and zone regulator kit, it optimizes energy
consumption by adjusting the plant delivery temperature for variable
temperature functioning
Documentation
Thermoregulation
Flow probe kit
Cod.3.015267
To be located on the delivery side of the plant, after the hydraulic
separator, it allows the cascade and zone regulator to manage the
delivery temperature of the plant or of the mixed zones available
Thermoregulation
GSM telephonic control
Cod.3.017182
For buildings not equipped with telephone network.
Documentation
Thermoregulation
Modulating room thermostat
Cod.3.015245
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.
Documentation
Thermoregulation
Remote control for single VICTRIX PRO V2
Cod.3.020358
This is a modulating control unit that serves to optimize climatic
management of the temperature in rooms.
It can only be used on systems with a single temperature control.
Documentation
Thermoregulation
SHC multifunction board kit
Cod.3.028338
It allows to integrate 3 more user circuits for each kits up to 4 kit (max 12 supplementary circuits).
N.B. 1 multifunction kit (not connected) is supplied as standard with the boiler.
N.B. 1 multifunction kit (not connected) is supplied as standard with the boiler.
Documentation
Thermoregulation
Solar collector temperature probe kit for UB Inox Solar V2, HERCULES SOLAR 26 ErP, ARES TEC ErP, ARES PRO and MAGIS HERCULES ErP
Cod.1.028812
As per standard with these products.
Thermoregulation
System delivery probe kit for the boiler VICTRIX PRO V2
Cod.3.024245
Connected to the boiler board, it measures the delivery temperature after the hydraulic manifold.
Documentation
Thermoregulation
Tele-management kit 2.0
Cod.3.029832
Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.
Documentation
Thermoregulation
Tele-management kit 2.0
Cod.3.034121
It works together with the Cascade and Zones regulator kit. It allows remote
management of the device with a dedicated APP.
Documentation
Thermoregulation
Telephonic control
Cod.3.013305
For buildings equipped with telephone network.
Documentation
Thermoregulation
VICTRIX SUPERIOR 35 PLUS and VICTRIX TERA 35 PLUS EU cascade kit
Cod.3.020355
To match VICTRIX SUPERIOR 35 PLUS and VICTRIX TERA 35 PLUS V2 EU in cascade
Electric interface Gas boiler-Cascade and zones regulator kit; it is necessary one interface each gas boiler.
Documentation
Thermoregulation
Wall box kit for cascade and zone regulator
Cod.3.015265
If the cascade and zone regolator is not install inside an electrical box.
Documentation
Thermoregulation
Zone manager kit
Cod.3.015264
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone, and allow remote control of the cascade and zone regulator.
Thermoregulation
Zone manager kit
Cod.3.034120
Modulating temperature control, backlit display and remote management of
the zone. It works together with the Cascade and Zones regulator kit.
Documentation
Thermoregulation
CARV2 (weekly chronothermostat and modulating remote control)
Cod.3.021395
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Documentation
Thermoregulation
CARV2 WIRELESS (radio wave weekly chronothermostat and modulating remote control)
Cod.3.021623
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Documentation
Thermoregulation
CRD PLUS (weekly chronothermostat and modulating remote control)
Cod.3.032645
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
Electrical box cover plate kit for SMARTECH PLUS
Cod.3.031013
It allows the covering of the wall hole for electrical boxes type 503.
Documentation
Thermoregulation
Expansion kit for SMARTECH PLUS
Cod.3.030911
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
Documentation
Thermoregulation
External probe
Cod.3.014083
Allows at the boiler to functioning at a variable temperature according to the climatic conditions.
Available for all models, except MYTHOS HP, NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
Documentation
Thermoregulation
GSM telephonic control
Cod.3.017182
For buildings not equipped with telephone network.
Documentation
Thermoregulation
MINI CRD (MINI weekly chronothermostat and modulating remote control)
Cod.3.020167
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Documentation
Thermoregulation
Multi-zone electronic board
Cod.3.028444
It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).
For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.
Thermoregulation
Relay board kit
Cod.3.015350
Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2
Documentation
Thermoregulation
Room thermostat
Cod.3.012287
Simple thermostat for the manual regulation of the temperature. Available for all models.
Documentation
Thermoregulation
SMARTECH PLUS - SMART remote control
Cod.3.030909
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
Temperature control class: V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
*default settings.
Thermoregulation
Solar probe kit
Cod.3.021452
For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP, NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
Thermoregulation
Telephonic control
Cod.3.013305
For buildings equipped with telephone network.
Documentation
Thermoregulation
CARV2 (weekly chronothermostat and modulating remote control)
Cod.3.021395
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Documentation
Thermoregulation
CARV2 WIRELESS (radio wave weekly chronothermostat and modulating remote control)
Cod.3.021623
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Documentation
Thermoregulation
CRD PLUS (weekly chronothermostat and modulating remote control)
Cod.3.032645
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
Cascade and zone regulator kit
Cod.3.015244
ON-OFF adjustment, modulation and malfunctions of the VICTRIX PRO in cascade (max 8). It can manage any climatic zone regulators in the system (max 3 plus 1 dedicated to the hot tap water circuit).
Thermoregulation
DOMINUS V2 interface kit
Cod.3.034903
For Hybrid and full electric solutions, Victrix Superior, Victrix Zeus Superior and Hercules range.
Dimensions (H=113,5 mm x W=123,5 mm x D=33,5 mm).
Documentation
Thermoregulation
Electrical box cover plate kit for SMARTECH PLUS
Cod.3.031013
It allows the covering of the wall hole for electrical boxes type 503.
Documentation
Thermoregulation
Expansion kit for SMARTECH PLUS
Cod.3.030911
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
Documentation
Thermoregulation
External probe
Cod.3.014083
Allows at the boiler to functioning at a variable temperature according to the climatic conditions.
Available for all models, except MYTHOS HP, NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
Documentation
Thermoregulation
External probe kit (for cascade installation)
Cod.3.024511
Paired with cascade and zone regulator kit, it optimizes energy
consumption by adjusting the plant delivery temperature for variable
temperature functioning
Documentation
Thermoregulation
Flow probe kit
Cod.3.015267
To be located on the delivery side of the plant, after the hydraulic
separator, it allows the cascade and zone regulator to manage the
delivery temperature of the plant or of the mixed zones available
Thermoregulation
GSM telephonic control
Cod.3.017182
For buildings not equipped with telephone network.
Documentation
Thermoregulation
Low temperature safety thermostat kit
Cod.3.019229
For generators settled up with low temperature
Documentation
Thermoregulation
MINI CRD (MINI weekly chronothermostat and modulating remote control)
Cod.3.020167
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Documentation
Thermoregulation
Modulating room thermostat
Cod.3.015245
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone. Allows control of room temperature only.
Documentation
Thermoregulation
Multi-zone electronic board
Cod.3.028444
It can manage 4 zones at the same temperature or 1 mixed and 1 direct zone by remote modulating controls (ie. CAR V2).
For VICTRIX ZEUS, VICTRIX MAIOR TT/X, VICTRIX TT ErP/X, VICTRIX EXA/X, VICTRIX TERA VIP, VICTRIX TERA/PLUS, VICTRIX OMNIA, MYTHOS HP, NIKE/AVIO ECO and NIKE STAR 24.
Thermoregulation
Relay board kit
Cod.3.015350
Allows interface between zone valves and CAR V2 or SUPER CAR, to send an alarm signal, to manage external pump etc.
To be installed inside internal unit both in MAGIS COMBO V2 and MAGIS PRO V2
Documentation
Thermoregulation
Room thermostat
Cod.3.012287
Simple thermostat for the manual regulation of the temperature. Available for all models.
Documentation
Thermoregulation
SMARTECH PLUS - SMART remote control
Cod.3.030909
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
Temperature control class: V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
*default settings.
Thermoregulation
Safety thermostat kit
Cod.3.019869
For HERCULES Condensing and HERCULES Solar.
Thermoregulation
Solar probe kit
Cod.3.021452
For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP, NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Thermoregulation
Super CAR (weekly thermostat and modulating remote control)
Cod.3.016577
Available for: All Superior models and VICTRIX Zeus, HERCULES, ZEUS kW, AVIO kW, NIKE Mini 28 kW Special.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Documentation
Thermoregulation
System delivery probe kit
Cod.3.030913
Documentation
Thermoregulation
Tele-management kit 2.0
Cod.3.029832
Can be combined exclusively with the cascade and zone regulator for connection to an ethernet network or via router/modem to an ADSL line for connection to a remote system.
Documentation
Thermoregulation
Telephonic control
Cod.3.013305
For buildings equipped with telephone network.
Documentation
Thermoregulation
Wireless room sensor kit
Cod.3.030906
Ideal for reading the room temperature of second or third zone.
To be matched to sensor receiver code 3.030908.
Product class V* or VI
Seasonal energy efficiency value 3%* or 4%
*as standard
Documentation
Thermoregulation
Wireless room sensors receiver kit
Cod.3.030908
The kit includes 1 room sensor and one receiver for the dialogue between boiler and room sensor.
Product class V* or VI
Seasonal energy efficiency value 3%* or 4%
*as standard
Documentation
Thermoregulation
Zone control unit V2 kit
Cod.3.030912
Control unit for external circulators/zone valves to manage 3 zones (2 mixed and 1 direct).
Documentation
Thermoregulation
Zone manager kit
Cod.3.015264
Electrically connected to cascade and zone regulator, serves to manage climatic conditions of one of system zone, and allow remote control of the cascade and zone regulator.
Thermoregulation
CARV2 (weekly chronothermostat and modulating remote control)
Cod.3.021395
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Documentation
Thermoregulation
CRD PLUS (weekly chronothermostat and modulating remote control)
Cod.3.032645
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
*as standard
Documentation
Thermoregulation
CRONO 7 (weekly digital chronothermostat)
Cod.3.021622
ON/OFF room thermostat.
Documentation
Thermoregulation
CRONO 7 WIRELESS (wireless weekly digital chronothermostat)
Cod.3.021624
Wireless ON/OFF room thermostat.
Documentation
Thermoregulation
Electrical box cover plate kit for SMARTECH PLUS
Cod.3.031013
It allows the covering of the wall hole for electrical boxes type 503.
Documentation
Thermoregulation
Expansion kit for SMARTECH PLUS
Cod.3.030911
For controlling the temperature in several areas of the house (example living and sleeping areas).
The kit includes: additional SMART thermostat and wi-fi relay (in this case the wi-fi network is required).
Documentation
Thermoregulation
External probe
Cod.3.014083
Allows at the boiler to functioning at a variable temperature according to the climatic conditions.
Available for all models, except MYTHOS HP, NIKE/EOLO STAR and NIKE/EOLO MYTHOS.
Class of device II*, VI or VII
Contribution to seasonal space heating energy efficiency 2%*, 4% or 3,5%
* as standard
Documentation
Thermoregulation
Low temperature safety thermostat kit
Cod.3.019229
For generators settled up with low temperature
Documentation
Thermoregulation
SMARTECH PLUS - SMART remote control
Cod.3.030909
Hi-tech smart wireless remote control with Bluetooth technology
The kit includes:
• Chronothermostat (to be placed where you want to adjust the temperature)
• Gateway (to be connected to the boiler or to the internet network at home - power supply 230 V)
• Wall fixing base (with leveling bubble integrated)
• Table stand
• 2 power batteries (as standard)
• Functioning room temperature: 0 - +40 °C
• Protection rating IP 20
Temperature control class: V* or VI
Contribution to seasonal space heating energy efficiency 3%* or 4%
*default settings.
Thermoregulation
Safety thermostat kit
Cod.3.019869
For HERCULES Condensing and HERCULES Solar.
Thermoregulation
Solar collector temperature probe kit for UB Inox Solar V2, HERCULES SOLAR 26 ErP, ARES TEC ErP, ARES PRO and MAGIS HERCULES ErP
Cod.1.028812
As per standard with these products.
Thermoregulation
Super CAR (weekly thermostat and modulating remote control)
Cod.3.016577
Available for: All Superior models and VICTRIX Zeus, HERCULES, ZEUS kW, AVIO kW, NIKE Mini 28 kW Special.
Class of device V* or VI
Contribution to the environmental heating seasonal energy efficiency 3%* or 4%
* as standard
Documentation
Thermoregulation
Telephonic control
Cod.3.013305
For buildings equipped with telephone network.
Documentation
Thermoregulation
PRO solar central unit
Cod.3.034595
Advanced central unit, capable of managing special systems (such as two sets of collectors on double-pitched roofs, heating systems integration, heating integration for swimming pools etc.). Supplied as per standard with four probes, to be able to control two different ΔT based on the type of system required.
It is supplied as per standard in combined solar packs for heating and domestic hot water integration.
Documentation
Thermoregulation
Solar central unit kit
Cod.3.019097
It includes probes for solar panels and storaga tank. Backlighted display.
Can be integrated to UB INOX 120 V2 and UB INOX 200 V2.
Documentation
Thermoregulation
Solar collector temperature probe kit for UB Inox Solar V2, HERCULES SOLAR 26 ErP, ARES TEC ErP, ARES PRO and MAGIS HERCULES ErP
Cod.1.028812
As per standard with these products.
Thermoregulation
Solar probe kit
Cod.3.021452
For VICTRIX TT SERIES, VICTRIX EXA, VICTRIX TERA, VICTRIX TERA VIP, NIKE ECO 24, MAIOR EOLO and MAGIS COMBO V2
Thermoregulation
Storage tank NTC probe
Cod.3.019375
Allows to check the DHW temperature of a Storage Tank Unit or puffer
Provided as per standard on all Storage Tank Units in the catalogue.
Flue systems
1 extension pipe Ø 60/100 0,3 m long with inspection hole
Cod.3.014418
Flue components for traditional boilers and water heaters.
Flue systems
1 extension pipe Ø 60/100 0,5 m long
Cod.3.018278
Flue components for traditional boilers and water heaters.
Flue systems
1 extension pipe Ø 60/100 1 m long
Cod.3.018277
Flue components for traditional boilers and water heaters.
Flue systems
90° bend Ø 60/100
Cod.3.018279
Flue components for traditional boilers and water heaters.
Flue systems
90° bend Ø 60/100 with inspection hole
Cod.3.016172
Flue components for traditional boilers and water heaters.
Flue systems
90° bend Ø 80 with inspection hole
Cod.3.016175
Flue components for traditional boilers and water heaters.
Flue systems
90° bend Ø 80/125 with inspection hole
Cod.3.016171
Flue components for traditional boilers and water heaters.
Flue systems
Concentric horizontal anti-freeze complete kit Ø 60/100
Cod.3.018210
Flue components for traditional boilers and water heaters.
Flue systems
Concentric horizontal complete kit Ø 60/100
Cod.3.017736
Flue components for traditional boilers and water heaters.
Flue systems
Condense tank kit Ø 60/100
Cod.3.016173
Flue components for traditional boilers and water heaters.
Flue systems
Female/female 90° bend Ø 80
Cod.3.011571
Flue components for traditional boilers and water heaters.
Flue systems
Flanged bend Ø 60/100
Cod.3.011139
Flue components for traditional boilers and water heaters.
Flue systems
1 extension pipe Ø 80 2 m long
Cod.3.016837
for VICTRIX PRO 35/55/60/68/80 V2
Flue systems
1 extension pipe Ø 80 2 m long
Cod.3.016837
for condensing boilers
Flue systems
2 x 45° Bend kit Ø 80/125
Cod.3.015248
Flue systems
4 extension pipes Ø 80 kit 0,5 m long
Cod.3.014642
for condensing boilers
Flue systems
4 x 90° bends Ø 80 kit
Cod.3.012091
for condensing boilers
Flue systems
45° bend Ø 60/100 kit
Cod.3.012095
For condensing boiler < 35 kW.
Flue systems
45° bend Ø 80 kit
Cod.3.012092
for condensing boilers
Flue systems
87° Bend kit Ø 80/125
Cod.3.015247
Flue systems
90° bend terminal kit Ø 50 (C5) for flexible ducting system
Cod.3.027357
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
90° bend Ø 60 for ducting system
Cod.3.013870
For condensing boilers < 35 kW.
Flue systems
90° bend Ø 60/100 kit
Cod.3.012093
For condensing boiler < 35 kW.
Flue systems
90° bend Ø 60/100 kit with inspection hole
Cod.3.016174
For condensing boiler < 35 kW.
Flue systems
Anti-wind vertical terminal kit Ø 80
Cod.3.021721
For condensing boiler < 35 kW.
Flue systems
Chimney hole closing panel
Cod.3.012008
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
Flue systems
Clapet kit for for collective flue systems operating under positive pressure
Cod.3.031599
For VICTRIX ZEUS SUPERIOR, VICTRIX SUPERIOR, VICTRIX MAIOR and VICTRIX EXTRA.
Documentation
Flue systems
Components support kit Ø 50 mm for flexible ducting system
Cod.3.027355
Flexible chimney ducting system for condensing boilers.
Flue systems
Concentric horizontal complete kit Ø 60/100
Cod.3.012000
Max lenght 12,9 m.
For condensing boiler < 35 kW.
Flue systems
Concentric horizontal outlet Ø 60/100
Cod.3.016836
for condensing boilers < 35 kW.
Flue systems
Concentric vertical complete kit Ø 60/100 (black colour)
Cod.3.018501
For condensing boiler < 35 kW.
Flue systems
Concentric vertical complete kit Ø 60/100 (red ocher colour)
Cod.3.016833
for condensing boilers < 35 kW.
Flue systems
Cover kit for VICTRIX TERA V2/PLUS V2
Cod.3.032844
For external installations, in partially protected places
Documentation
Flue systems
Cover kit for VICTRIX TERA/PLUS
Cod.3.027263
For external installations, in partially protected places
Documentation
Flue systems
Extension pipe kit Ø 60/100 0,5 m long
Cod.3.014643
For condensing boiler < 35 kW.
Flue systems
Extension pipe kit Ø 60/100 1 m long
Cod.3.012089
For condensing boiler < 35 kW.
Flue systems
Extension pipe kit Ø 80/125 1 m long
Cod.3.018667
For VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.
Flue systems
Extension pipe kit Ø 80/125 2 m long
Cod.3.015246
for VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.
Flue systems
Flange Ø 60/100 coupling Ø 80/125 adapter kit
Cod.3.022990
To be used with the concentric kits.
For condensing boiler < 35 kW.
Documentation
Flue systems
Flanged stub-pipe + bend + extension pipe Ø 80 for flue discharge
Cod.3.016365
For condensing boilers < 35 kW.
Flue systems
Flanged stub-pipe kit Ø 60/100
Cod.3.012086
For condensing boiler < 35 kW.
Flue systems
Flanged stub-pipe kit Ø 80
Cod.3.012087
For condensing boilers < 35 kW.
Flue systems
Flanged stub-pipe Ø 80 for flue discharge
Cod.3.016364
For condensing boilers < 35 kW.
Flue systems
Flexible ducting kit Ø 80 12m with spacers
Cod.3.027875
L=12 m + 4 centering spacers.
For condensing boilers.
Flue systems
Flexible hose kit Ø 50 mm L. 10 m
Cod.3.027354
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
Flexible/flexible adapter kit for flexible ducting system Ø 50
Cod.3.027359
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
Flexible/flexible adapter kit for flexible ducting Ø 80
Cod.3.027877
For condensing boilers.
Documentation
Flue systems
Gasket kit Ø 125
Cod.3.015345
Flue systems
Gasket kits 10 pcs. Ø 80 Ø 80
Cod.3.015378
Flue systems
Gasket kits 10 pcs. Ø 80 Ø 80/125
Cod.3.015343
Flue systems
HERCULES Condensing B22 - B23 terminal kit
Cod.3.020004
For air intake from technical installation room.
For HERCULES CONDENSING range
Documentation
Flue systems
Horizontal concentric complete kit Ø 60/100 Short
Cod.3.024598
Max lenght 11,9 m.
For condensing boiler < 35 kW.
Flue systems
Horizontal concentric complete kit Ø 60/100 with swivel terminal
Cod.3.024267
Max lenght 9,9 m.
For condensing boiler < 35 kW except HP models.
Flue systems
Horizontal concentric kit Ø 80/125
Cod.3.030782
For condensing boiler < 35 kW.
Documentation
Flue systems
Horizontal concentric swivel outlet Ø 60/100
Cod.3.027408
for condensing boilers < 35 kW.
Flue systems
Horizontal outlet terminal Ø 80
Cod.3.016363
For condensing boiler < 35 kW.
Flue systems
Pipe clamp kit for ducting system Ø 60
Cod.3.012145
5 pipe clamps Ø 60.
For condensing boilers < 35 kW.
Flue systems
Push-fitting extension pipes kit 1 m for ducting system Ø 60
Cod.3.012144
4 extension pipes Ø 60 2 m long.
For condensing boilers < 35 kW.
Documentation
Flue systems
Push-fitting extension pipes kit 2 m for ducting system Ø 60
Cod.3.013869
1 extension pipe Ø 60 2 m long.
For condensing boilers < 35 kW.
Documentation
Flue systems
Spacer pipe clamp kit for ducting system Ø 60
Cod.3.012146
3 spacer pipe clamps Ø 60.
For condensing boilers < 35 kW.
Documentation
Flue systems
Support bend kit for ducting system Ø 60
Cod.3.012153
Support bend Ø 60, bend locking collar, clamp,
reduction Ø 80 - Ø 60.
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
Documentation
Flue systems
Support bend kit Ø 80 mm 70° M and flexible ducting adapter Ø 80
Cod.3.027874
For condensing boilers.
Documentation
Flue systems
Support bend kit Ø 80 mm 87° and flexible ducting adapter Ø 80
Cod.3.027873
For condensing boilers.
Documentation
Flue systems
Terminal vertical outlet kit Ø 80
Cod.3.015256
For condensing boiler < 35 kW.
Flue systems
Vertical concentric kit Ø 80/125
Cod.3.015243
For condensing boilers < 35 kW.
Documentation
Flue systems
Vertical outlet kit for ducting system Ø 60
Cod.3.012112
Vertical concentric exhaust flue terminal Ø 60 and chimney closing panel.
For condensign boilers < 35 kW.
For condensign boilers < 35 kW.
Documentation
Flue systems
Vertical outlet kit Ø 80/125 for flexible ducting Ø 80
Cod.3.027876
For condensing boilers.
Documentation
Flue systems
Vertical terminal kit Ø 80/125 for flexible ducting system Ø 50 (C5+C9)
Cod.3.027358
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
Vertical terminal outlet outdoor kit Ø 80
Cod.3.024295
(stainless steel) VICTRIX PRO 35/55/60/68/80 V2
(for outdoor) length 0.55m
Technical note: size is not adjustable
Flue systems
Ø 80 "T-shaped" terminal kit Ø 80 (C5) for flexible ducting system
Cod.3.027356
Flexible chimney ducting system for condensing boilers.
Flue systems
Ø 100 adapter kit for C9 ducting system
Cod.3.022032
For direct air intake from an existing chimney with green series duct systems.
For condensing boilers < 35 kW.
Documentation
Flue systems
Ø 125 adapter kit for C9 ducting system
Cod.3.022033
For direct air intake from an existing chimney with green series ducting systems. The kit must combined with Ø 80/125 flue discharge kits according to the condensing boiler installation.
For condensing boilers.
Documentation
Flue systems
1 extension pipe Ø 80 2 m long
Cod.3.016837
for VICTRIX PRO 35/55/60/68/80 V2
Flue systems
1 extension pipe Ø 80 2 m long
Cod.3.016837
for condensing boilers
Flue systems
4 extension pipes Ø 80 kit 0,5 m long
Cod.3.014642
for condensing boilers
Flue systems
4 x 90° bends Ø 80 kit
Cod.3.012091
for condensing boilers
Flue systems
45° bend Ø 60/100 kit
Cod.3.012095
For condensing boiler < 35 kW.
Flue systems
45° bend Ø 80 kit
Cod.3.012092
for condensing boilers
Flue systems
90° bend terminal kit Ø 50 (C5) for flexible ducting system
Cod.3.027357
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
90° bend Ø 60 for ducting system
Cod.3.013870
For condensing boilers < 35 kW.
Flue systems
90° bend Ø 60/100 kit
Cod.3.012093
For condensing boiler < 35 kW.
Flue systems
Anti-wind vertical terminal kit Ø 80
Cod.3.021721
For condensing boiler < 35 kW.
Flue systems
Chimney hole closing panel
Cod.3.012008
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
Flue systems
Components support kit Ø 50 mm for flexible ducting system
Cod.3.027355
Flexible chimney ducting system for condensing boilers.
Flue systems
Concentric horizontal complete kit Ø 60/100
Cod.3.012000
Max lenght 12,9 m.
For condensing boiler < 35 kW.
Flue systems
Concentric horizontal outlet Ø 60/100
Cod.3.016836
for condensing boilers < 35 kW.
Flue systems
Concentric vertical complete kit Ø 60/100 (red ocher colour)
Cod.3.016833
for condensing boilers < 35 kW.
Flue systems
Cover kit for VICTRIX SUPERIOR 32 ErP/ 32 X ErP and MAGIS VICTRIX ErP
Cod.3.017209
For external installations, in partially protected places
Flue systems
Cover kit for VICTRIX TERA/PLUS
Cod.3.027263
For external installations, in partially protected places
Documentation
Flue systems
Extension pipe kit Ø 60/100 0,5 m long
Cod.3.014643
For condensing boiler < 35 kW.
Flue systems
Extension pipe kit Ø 60/100 1 m long
Cod.3.012089
For condensing boiler < 35 kW.
Flue systems
Flange Ø 60/100 coupling Ø 80/125 adapter kit
Cod.3.022990
To be used with the concentric kits.
For condensing boiler < 35 kW.
Documentation
Flue systems
Flanged stub-pipe + bend + extension pipe Ø 80 for flue discharge
Cod.3.016365
For condensing boilers < 35 kW.
Flue systems
Flanged stub-pipe kit Ø 60/100
Cod.3.012086
For condensing boiler < 35 kW.
Flue systems
Flanged stub-pipe kit Ø 80
Cod.3.012087
For condensing boilers < 35 kW.
Flue systems
Flanged stub-pipe Ø 80 for flue discharge
Cod.3.016364
For condensing boilers < 35 kW.
Flue systems
Flexible ducting kit Ø 80 12m with spacers
Cod.3.027875
L=12 m + 4 centering spacers.
For condensing boilers.
Flue systems
Flexible hose kit Ø 50 mm L. 10 m
Cod.3.027354
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
Flexible/flexible adapter kit for flexible ducting system Ø 50
Cod.3.027359
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
Flexible/flexible adapter kit for flexible ducting Ø 80
Cod.3.027877
For condensing boilers.
Documentation
Flue systems
Gasket kit Ø 125
Cod.3.015345
Flue systems
Gasket kits 10 pcs. Ø 80 Ø 80
Cod.3.015378
Flue systems
Gasket kits 10 pcs. Ø 80 Ø 80/125
Cod.3.015343
Flue systems
HERCULES Condensing B22 - B23 terminal kit
Cod.3.020004
For air intake from technical installation room.
For HERCULES CONDENSING range
Documentation
Flue systems
Horizontal concentric complete kit Ø 60/100 Short
Cod.3.024598
Max lenght 11,9 m.
For condensing boiler < 35 kW.
Flue systems
Horizontal concentric complete kit Ø 60/100 with swivel terminal
Cod.3.024267
Max lenght 9,9 m.
For condensing boiler < 35 kW except HP models.
Flue systems
Horizontal concentric swivel outlet Ø 60/100
Cod.3.027408
for condensing boilers < 35 kW.
Flue systems
Horizontal outlet terminal Ø 80
Cod.3.016363
For condensing boiler < 35 kW.
Flue systems
Pipe clamp kit for ducting system Ø 60
Cod.3.012145
5 pipe clamps Ø 60.
For condensing boilers < 35 kW.
Flue systems
Push-fitting extension pipes kit 1 m for ducting system Ø 60
Cod.3.012144
4 extension pipes Ø 60 2 m long.
For condensing boilers < 35 kW.
Documentation
Flue systems
Push-fitting extension pipes kit 2 m for ducting system Ø 60
Cod.3.013869
1 extension pipe Ø 60 2 m long.
For condensing boilers < 35 kW.
Documentation
Flue systems
Spacer pipe clamp kit for ducting system Ø 60
Cod.3.012146
3 spacer pipe clamps Ø 60.
For condensing boilers < 35 kW.
Documentation
Flue systems
Support bend kit for ducting system Ø 60
Cod.3.012153
Support bend Ø 60, bend locking collar, clamp,
reduction Ø 80 - Ø 60.
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
Documentation
Flue systems
Support bend kit Ø 80 mm 70° M and flexible ducting adapter Ø 80
Cod.3.027874
For condensing boilers.
Documentation
Flue systems
Support bend kit Ø 80 mm 87° and flexible ducting adapter Ø 80
Cod.3.027873
For condensing boilers.
Documentation
Flue systems
Terminal vertical outlet kit Ø 80
Cod.3.015256
For condensing boiler < 35 kW.
Flue systems
Vertical outlet kit for ducting system Ø 60
Cod.3.012112
Vertical concentric exhaust flue terminal Ø 60 and chimney closing panel.
For condensign boilers < 35 kW.
For condensign boilers < 35 kW.
Documentation
Flue systems
Vertical outlet kit Ø 80/125 for flexible ducting Ø 80
Cod.3.027876
For condensing boilers.
Documentation
Flue systems
Vertical terminal kit Ø 80/125 for flexible ducting system Ø 50 (C5+C9)
Cod.3.027358
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
Ø 80 "T-shaped" terminal kit Ø 80 (C5) for flexible ducting system
Cod.3.027356
Flexible chimney ducting system for condensing boilers.
Flue systems
Ø 100 adapter kit for C9 ducting system
Cod.3.022032
For direct air intake from an existing chimney with green series duct systems.
For condensing boilers < 35 kW.
Documentation
Flue systems
Ø 125 adapter kit for C9 ducting system
Cod.3.022033
For direct air intake from an existing chimney with green series ducting systems. The kit must combined with Ø 80/125 flue discharge kits according to the condensing boiler installation.
For condensing boilers.
Documentation
Flue systems
1 extension pipe Ø 80 2 m long
Cod.3.016837
for VICTRIX PRO 35/55/60/68/80 V2
Flue systems
1 extension pipe Ø 80 2 m long
Cod.3.016837
for condensing boilers
Flue systems
4 extension pipes Ø 80 kit 0,5 m long
Cod.3.014642
for condensing boilers
Flue systems
4 x 90° bends Ø 80 kit
Cod.3.012091
for condensing boilers
Flue systems
45° bend Ø 60/100 kit
Cod.3.012095
For condensing boiler < 35 kW.
Flue systems
45° bend Ø 80 kit
Cod.3.012092
for condensing boilers
Flue systems
90° bend terminal kit Ø 50 (C5) for flexible ducting system
Cod.3.027357
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
90° bend Ø 60 for ducting system
Cod.3.013870
For condensing boilers < 35 kW.
Flue systems
90° bend Ø 60/100 kit
Cod.3.012093
For condensing boiler < 35 kW.
Flue systems
Anti-wind vertical terminal kit Ø 80
Cod.3.021721
For condensing boiler < 35 kW.
Flue systems
Chimney hole closing panel
Cod.3.012008
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
Flue systems
Components support kit Ø 50 mm for flexible ducting system
Cod.3.027355
Flexible chimney ducting system for condensing boilers.
Flue systems
Concentric horizontal complete kit Ø 60/100
Cod.3.012000
Max lenght 12,9 m.
For condensing boiler < 35 kW.
Flue systems
Concentric horizontal outlet Ø 60/100
Cod.3.016836
for condensing boilers < 35 kW.
Flue systems
Concentric vertical complete kit Ø 60/100 (red ocher colour)
Cod.3.016833
for condensing boilers < 35 kW.
Flue systems
Extension pipe kit Ø 60/100 0,5 m long
Cod.3.014643
For condensing boiler < 35 kW.
Flue systems
Extension pipe kit Ø 60/100 1 m long
Cod.3.012089
For condensing boiler < 35 kW.
Flue systems
Flange Ø 60/100 coupling Ø 80/125 adapter kit
Cod.3.022990
To be used with the concentric kits.
For condensing boiler < 35 kW.
Documentation
Flue systems
Flanged stub-pipe + bend + extension pipe Ø 80 for flue discharge
Cod.3.016365
For condensing boilers < 35 kW.
Flue systems
Flanged stub-pipe kit Ø 60/100
Cod.3.012086
For condensing boiler < 35 kW.
Flue systems
Flanged stub-pipe kit Ø 80
Cod.3.012087
For condensing boilers < 35 kW.
Flue systems
Flanged stub-pipe Ø 80 for flue discharge
Cod.3.016364
For condensing boilers < 35 kW.
Flue systems
Flexible ducting kit Ø 80 12m with spacers
Cod.3.027875
L=12 m + 4 centering spacers.
For condensing boilers.
Flue systems
Flexible hose kit Ø 50 mm L. 10 m
Cod.3.027354
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
Flexible/flexible adapter kit for flexible ducting system Ø 50
Cod.3.027359
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
Flexible/flexible adapter kit for flexible ducting Ø 80
Cod.3.027877
For condensing boilers.
Documentation
Flue systems
Gasket kit Ø 125
Cod.3.015345
Flue systems
Gasket kits 10 pcs. Ø 80 Ø 80
Cod.3.015378
Flue systems
Gasket kits 10 pcs. Ø 80 Ø 80/125
Cod.3.015343
Flue systems
HERCULES Condensing B22 - B23 terminal kit
Cod.3.020004
For air intake from technical installation room.
For HERCULES CONDENSING range
Documentation
Flue systems
Horizontal concentric complete kit Ø 60/100 Short
Cod.3.024598
Max lenght 11,9 m.
For condensing boiler < 35 kW.
Flue systems
Horizontal concentric complete kit Ø 60/100 with swivel terminal
Cod.3.024267
Max lenght 9,9 m.
For condensing boiler < 35 kW except HP models.
Flue systems
Horizontal concentric swivel outlet Ø 60/100
Cod.3.027408
for condensing boilers < 35 kW.
Flue systems
Horizontal outlet terminal Ø 80
Cod.3.016363
For condensing boiler < 35 kW.
Flue systems
Pipe clamp kit for ducting system Ø 60
Cod.3.012145
5 pipe clamps Ø 60.
For condensing boilers < 35 kW.
Flue systems
Push-fitting extension pipes kit 1 m for ducting system Ø 60
Cod.3.012144
4 extension pipes Ø 60 2 m long.
For condensing boilers < 35 kW.
Documentation
Flue systems
Push-fitting extension pipes kit 2 m for ducting system Ø 60
Cod.3.013869
1 extension pipe Ø 60 2 m long.
For condensing boilers < 35 kW.
Documentation
Flue systems
Spacer pipe clamp kit for ducting system Ø 60
Cod.3.012146
3 spacer pipe clamps Ø 60.
For condensing boilers < 35 kW.
Documentation
Flue systems
Support bend kit for ducting system Ø 60
Cod.3.012153
Support bend Ø 60, bend locking collar, clamp,
reduction Ø 80 - Ø 60.
For condensing boilers < 35 kW.
For condensing boilers < 35 kW.
Documentation
Flue systems
Support bend kit Ø 80 mm 70° M and flexible ducting adapter Ø 80
Cod.3.027874
For condensing boilers.
Documentation
Flue systems
Support bend kit Ø 80 mm 87° and flexible ducting adapter Ø 80
Cod.3.027873
For condensing boilers.
Documentation
Flue systems
Terminal vertical outlet kit Ø 80
Cod.3.015256
For condensing boiler < 35 kW.
Flue systems
Vertical outlet kit for ducting system Ø 60
Cod.3.012112
Vertical concentric exhaust flue terminal Ø 60 and chimney closing panel.
For condensign boilers < 35 kW.
For condensign boilers < 35 kW.
Documentation
Flue systems
Vertical outlet kit Ø 80/125 for flexible ducting Ø 80
Cod.3.027876
For condensing boilers.
Documentation
Flue systems
Vertical terminal kit Ø 80/125 for flexible ducting system Ø 50 (C5+C9)
Cod.3.027358
Flexible chimney ducting system for condensing boilers.
Documentation
Flue systems
Ø 80 "T-shaped" terminal kit Ø 80 (C5) for flexible ducting system
Cod.3.027356
Flexible chimney ducting system for condensing boilers.
Flue systems
Ø 100 adapter kit for C9 ducting system
Cod.3.022032
For direct air intake from an existing chimney with green series duct systems.
For condensing boilers < 35 kW.
Documentation
Flue systems
Ø 125 adapter kit for C9 ducting system
Cod.3.022033
For direct air intake from an existing chimney with green series ducting systems. The kit must combined with Ø 80/125 flue discharge kits according to the condensing boiler installation.
For condensing boilers.
Documentation
Flue systems
1 extension pipe Ø 80 2 m long
Cod.3.016837
for VICTRIX PRO 35/55/60/68/80 V2
Flue systems
1 extension pipe Ø 80 2 m long
Cod.3.016837
for condensing boilers
Flue systems
2 x 45° Bend kit Ø 80/125
Cod.3.015248
Flue systems
2 x 45° bend kit Ø 125
Cod.3.016180
For RAPAX 100 V2.
Documentation
Flue systems
2 x 45° bend kit Ø 160
Cod.3.024518
for VICTRIX PRO V2 and RAPAX 200/300 V3
Flue systems
2 x 45° bend kit Ø 200 for flue manifold
Cod.3.024664
For installations in central heating systems with VICTRIX PRO V2.
Documentation
Flue systems
2 x 45° bend kit Ø 250 for flue manifold
Cod.3.024669
For installations in central heating systems with VICTRIX PRO V2.
Documentation
Flue systems
4 extension pipes Ø 80 kit 0,5 m long
Cod.3.014642
for condensing boilers
Flue systems
4 extension pipes Ø 100 kit 0,5 m long
Cod.3.031132
for VICTRIX PRO 100/120/150 V2
Flue systems
4 extension pipes Ø 100 kit 1 m long
Cod.3.031373
for VICTRIX PRO 100/120/150 V2
Flue systems
4 extension pipes Ø 100 kit 2 m long
Cod.3.032319
for VICTRIX PRO 100/120/150 V2
Flue systems
4 extension pipes Ø 160 kit
Cod.3.034559
For VICTRIX PRO 180 V2 0,5 m long
Flue systems
4 extension pipes Ø 160 kit
Cod.3.034560
For VICTRIX PRO 180 V2 1 m long
Flue systems
4 extension pipes Ø 160 kit
Cod.3.034561
For VICTRIX PRO 180 V2 2 m long
Flue systems
4 x 87° bends Ø 100 kit
Cod.3.032731
for VICTRIX PRO 100/120/150 V2
Flue systems
4 x 90° bends Ø 80 kit
Cod.3.012091
for condensing boilers
Flue systems
4 x 90° bends Ø 160 kit
Cod.3.034563
For VICTRIX PRO 180 V2
Flue systems
45° bend Ø 80 kit
Cod.3.012092
for condensing boilers
Flue systems
45° bend Ø 100 kit
Cod.3.032195
for VICTRIX PRO 100/120/150 V2
Flue systems
45° bend Ø 110/160 kit
Cod.3.031395
for VICTRIX PRO 100/120/150 V2
Flue systems
45° bend Ø 160 kit
Cod.3.034562
For VICTRIX PRO 180 V2
Flue systems
87° Bend kit Ø 80/125
Cod.3.015247
Flue systems
87° bend kit Ø 125
Cod.3.016179
For RAPAX 100 V2.
Documentation
Flue systems
87° bend kit Ø 160
Cod.3.024517
For VICTRIX PRO V2 and RAPAX 200/300 V3
Flue systems
87° bend kit Ø 200 for flue manifold
Cod.3.024665
Flue systems
87° bend kit Ø 250 for flue manifold
Cod.3.024670
For installations in central heating systems with VICTRIX PRO V2.
Documentation
Flue systems
87° bend Ø 110/160 kit
Cod.3.031396
for VICTRIX PRO 100/120/150 V2
Flue systems
Additional exhaust manifold kit VICTRIX PRO 35/55/60/68/80 V2 Ø 160 with flue lock DN 80
Cod.3.034258
for connection of an additional boiler
Documentation
Flue systems
Additional exhaust manifold kit VICTRIX PRO 100/120/150 V2 Ø 200
Cod.3.034260
Additional exhaust manifold kit Ø 200 with flue lock DN 125 for connection of an additional boiler
Documentation
Flue systems
Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 4 VICTRIX PRO 150 V2
Cod.3.034261
Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 4 VICTRIX PRO 150 V2
Documentation
Flue systems
Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 5 VICTRIX PRO 150 V2
Cod.3.034262
Additional exhaust manifold kit Ø 250 with flue lock DN 125 for 5 VICTRIX PRO 150 V2
Documentation
Flue systems
Chimney hole closing panel
Cod.3.012008
Hole closing panel, inspection door and grommet for ducting system.
For condensing boilers < 35 kW.
Flue systems
Clapet valve kit Ø 80 in stainless steel
Cod.3.033715
For VICTRIX PRO 35-55-60-68-80 V2.
Documentation
Flue systems
Clapet valve kit Ø 125 in stainless steel
Cod.3.033716
For VICTRIX PRO 100-120-150 V2.
Documentation
Flue systems
Exhaust manifold kit VICTRIX PRO 35/55/60/68/80 V2 Ø 160 with flue lock DN 80
Cod.3.034257
for exhaust connection of two boilers in cascade
Documentation
Flue systems
Exhaust manifold kit Ø 200 VICTRIX PRO 100/120/150 V2
Cod.3.034259
Exhaust manifold kit Ø 200 with flue lock DN 125 for exhaust connection of two boilers in cascade.
Documentation
Flue systems
Extension pipe kit Ø 80/125 1 m long
Cod.3.018667
For VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.
Flue systems
Extension pipe kit Ø 80/125 2 m long
Cod.3.015246
for VICTRIX PRO 35/55/60/68/80 V2 and condensing boiler < 35 kW.
Flue systems
Extension pipe kit Ø 110/160 1 m long
Cod.3.031397
for VICTRIX PRO 100/120/150 V2
Flue systems
Extension pipe kit Ø 110/160 2 m long
Cod.3.031398
for VICTRIX PRO 100/120/150 V2
Flue systems
Extension pipe kit Ø 125 0,5 m long
Cod.3.016370
For RAPAX 100 V2
Documentation
Flue systems
Extension pipe kit Ø 125 1 m long
Cod.3.016371
For RAPAX 100 V2.
Documentation
Flue systems
Extension pipe kit Ø 125 2 m long
Cod.3.015250
For RAPAX 100 V2.
Documentation
Flue systems
Extension pipe kit Ø 160 1 m long
Cod.3.024516
For VICTRIX PRO V2 and RAPAX 200-300 V3.
Flue systems
Extension pipe Ø 160 kit 0,5 m long
Cod.3.024659
For VICTRIX PRO V2 and RAPAX 200-300 V3.
Flue systems
Extension pipe Ø 200 kit 0,5 m long for flue manifold
Cod.3.024663
For installations in central heating systems with VICTRIX PRO V2.
Documentation
Flue systems
Extension pipe Ø 200 kit 1 m long for flue manifold
Cod.3.024662
For installations in central heating systems with VICTRIX PRO V2.
Documentation
Flue systems
Extension pipe Ø 250 kit 1 m long for flue manifold
Cod.3.024668
For installations in central heating systems with VICTRIX PRO V2.
Documentation
Flue systems
Flashing Kit Ø 80/125 for flat roof
Cod.3.015249
for VICTRIX PRO 35/55/60/68/80 V2
Flue systems
Gasket kit Ø 110
Cod.3.015344
Flue systems
Gasket kit Ø 125
Cod.3.015345
Flue systems
Gasket kits 4 pcs. Ø 100
Cod.3.032732
Flue systems
Gasket kits 10 pcs. Ø 80 Ø 80
Cod.3.015378
Flue systems
Gasket kits 10 pcs. Ø 80 Ø 80/125
Cod.3.015343
Flue systems
Horizontal concentric kit Ø 80/125
Cod.3.030782
For condensing boiler < 35 kW.
Documentation
Flue systems
Horizontal concentric kit Ø 80/125
Cod.3.033785
for VICTRIX PRO 35/55/60/68/80 V2
Flue systems
Horizontal concentric kit Ø 110/160
Cod.3.031393
for VICTRIX PRO 100-120 ErP.
Documentation
Flue systems
Horizontal concentric kit Ø 110/160
Cod.3.033789
for VICTRIX PRO 100/120/150 V2
Flue systems
Horizontal kit Ø 80
Cod.3.015255
for VICTRIX PRO 35/55/60/68/80 V2 (to discharge horizontally)
Flue systems
Horizontal kit Ø 80
Cod.3.015254
for VICTRIX PRO 35/55/60/68/80 V2 (to discharge in the chimney)
Flue systems
Horizontal kit Ø 100
Cod.3.032715
for VICTRIX PRO 100/120/150 V2 (to discharge in the chimney)
Flue systems
Horizontal kit Ø 100
Cod.3.032716
for VICTRIX PRO 100/120/150 V2 (to discharge horizontally)
Flue systems
Horizontal kit Ø 160
Cod.3.034556
For VICTRIX PRO 180 V2 (to discharge in the chimney)
Flue systems
Horizontal kit Ø 160
Cod.3.034557
For VICTRIX PRO 180 V2 (to discharge horizontally)
Flue systems
Horizontal outlet terminal Ø 80
Cod.3.016363
For condensing boiler < 35 kW.
Flue systems
Rear flue discharge kit for ARES Tec 150/200 kW
Cod.3.023701
In comparison to the standard versions, the ARES Tec 150/350 models can be installed with a flue exhaust on the back, using appropriate optional kits.
Flue systems
Rear flue discharge kit for ARES Tec 250/350 kW
Cod.3.023674
In comparison to the standard versions, the ARES Tec 150/350 models can be installed with a flue exhaust on the back, using appropriate optional kits.
Documentation
Flue systems
Stub-pipe kit Ø80
Cod.3.033759
for air intake for VICTRIX PRO 35/55/60/68/80 V2 with B23 configuration
Documentation
Flue systems
Stub-pipe kit Ø100
Cod.3.033760
for air intake for VICTRIX PRO 100/120/150 V2 with
B23 configuration
Flue systems
Stub-pipe kit Ø160 for air intake
Cod.3.034565
for VICTRIX PRO 180 V2 with B23 configuration
Flue systems
Support bend kit Ø 80 mm 70° M and flexible ducting adapter Ø 80
Cod.3.027874
For condensing boilers.
Documentation
Flue systems
Support bend kit Ø 80 mm 87° and flexible ducting adapter Ø 80
Cod.3.027873
For condensing boilers.
Documentation
Flue systems
Supporting kit for side flue discharge ARES Tec
Cod.3.023675
All models.
Flue systems
Terminal vertical outlet kit Ø 80
Cod.3.015256
For condensing boiler < 35 kW.
Flue systems
Terminal vertical outlet kit Ø 160
Cod.3.034554
For VICTRIX PRO 180 V2 2 (to discharge at roof)
Flue systems
Twin pipes complete kit Ø 100/100
Cod.3.032717
for VICTRIX PRO 100/120/150 V2 (color RAL 9010)
Flue systems
Vertical concentric kit Ø 80/125
Cod.3.015243
For condensing boilers < 35 kW.
Documentation
Flue systems
Vertical concentric kit Ø 80/125
Cod.3.033786
for VICTRIX PRO 35/55/60/68/80 V2
(black coloured, with converse for pitched roofs)
Flue systems
Vertical concentric kit Ø 110/160
Cod.3.033790
for VICTRIX PRO 100/120/150 V2
(black coloured, with converse for pitched roofs)
Flue systems
Vertical outlet kit Ø 80/125 for flexible ducting Ø 80
Cod.3.027876
For condensing boilers.
Documentation
Flue systems
Vertical terminal outlet kit Ø 80
Cod.3.034579
VICTRIX PRO 35/55/60/68/80 V2 (to discharge at roof)
Flue systems
Vertical terminal outlet kit Ø 100
Cod.3.032713
For VICTRIX PRO 100/120/150 V2 (to discharge at roof)
Flue systems
Vertical terminal outlet outdoor kit Ø 80
Cod.3.024295
(stainless steel) VICTRIX PRO 35/55/60/68/80 V2
(for outdoor) length 0.55m
Technical note: size is not adjustable
Flue systems
Vertical terminal outlet outdoor kit Ø 100
Cod.3.032714
(stainless steel)
VICTRIX PRO 100/120/150 V2
(for outdoor) length 1m
Flue systems
Vertical terminal outlet outdoor kit Ø 160 (stainless steel)
Cod.3.034555
For VICTRIX PRO 180 V2
(for outdoor) length 1m
Technical note: size is not adjustable
Flue systems
2 x 45° bend kit Ø 125
Cod.3.016180
For RAPAX 100 V2.
Documentation
Flue systems
2 x 45° bend kit Ø 160
Cod.3.024518
for VICTRIX PRO V2 and RAPAX 200/300 V3
Flue systems
87° bend kit Ø 125
Cod.3.016179
For RAPAX 100 V2.
Documentation
Flue systems
87° bend kit Ø 160
Cod.3.024517
For VICTRIX PRO V2 and RAPAX 200/300 V3
Flue systems
Duct adapter Ø 160
Cod.3.025232
for RAPAX 200/300 V3 and 200/300 SOL V3
Flue systems
Extension pipe kit Ø 125 0,5 m long
Cod.3.016370
For RAPAX 100 V2
Documentation
Flue systems
Extension pipe kit Ø 125 1 m long
Cod.3.016371
For RAPAX 100 V2.
Documentation
Flue systems
Extension pipe kit Ø 125 2 m long
Cod.3.015250
For RAPAX 100 V2.
Documentation
Flue systems
Extension pipe kit Ø 160 1 m long
Cod.3.024516
For VICTRIX PRO V2 and RAPAX 200-300 V3.
Flue systems
Extension pipe Ø 160 kit 0,5 m long
Cod.3.024659
For VICTRIX PRO V2 and RAPAX 200-300 V3.
Flue systems
Inlet/exhaust pipes insulation kit
Cod.3.028371
For RAPAX 100 V2
Composed by:
• n.2 White polyethylene insulation layer, thickness 5 mm for pipe Ø 125 mm
L. 1000 mm
• n.4 White polyethylene insulation layer, thickness 5 mm for bend Ø 125 mm
• n.1 White polyethylene tape 2x70x4000 mm
Documentation
Flue systems
Inlet/exhaust pipes insulation kit
Cod.3.027545
For RAPAX 200/300 V3 and 200/300 SOL V3
Documentation
Options
1 litre bottle of glycol
Cod.1.028473
To be mixed with water according to the minimum outside temperature.
Options
1"¼ thermostatic mixing valve kit
Cod.3.020322
The kit includes:
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 85 °C.
Equipped with thermometer
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 85 °C.
Equipped with thermometer
Documentation
Options
2 brackets kit for slates/tiles for CP4 XL/M Flat-Plate Collector
Cod.3.022680
The kit includes: 2 brackets, 1 fixing clamp with hole, 1 mounting template (to be removed after installation).
Documentation
Options
2 plug kit for CP4 XL/M Flat-Plate Collector
Cod.3.020364
The kit includes: 2 mechanical sealing plugs to close fittings not used by CP4 XL/M Flat-Plate Collector.
Options
3-way valve kit
Cod.3.020632
Documentation
Options
4 "L"-shaped brackets kit for slates/tiles on smooth roofs for CP4 XL/M Flat-Plate Collector
Cod.3.022776
The kit includes: 4 brackets.
It allows to fix the selector frame onto smooth roofs (for 1 collector). Always add the fixing element kit code 3.022922.
Options
4 brackets kit for slates/tiles for CP4 XL/M Flat-Plate Collector
Cod.3.022678
The kit includes: 4 brackets, 2 collector side fixing brackets.
It allows to fix the collector frame onto sloped roofs without drilling the tiles (for 1 collector).
Documentation
Options
4 brackets kit for slates/tiles to be drilled for CP4 XL/M Flat-Plate Collector
Cod.3.019105
The kit includes: 4 brackets.
It allows to fix the collector frame onto sloped roofs.
Always add the fixing element kit code 3.022922.
Always add the fixing element kit code 3.022922.
Documentation
Options
4 brackets kit for slates/tiles to fix directly on roof for NATURAL SOL
Cod.3.019236
It allows to fix the collector frame directly onto sloped roofs without drilling the tiles.
Documentation
Options
18 litre expansion vessel kit
Cod.3.019131
Including metal clamp and wall fixing bracket.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.
Options
24 litre expansion vessel kit
Cod.3.019138
Including metal clamp and wall fixing bracket.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.
Options
35 litre expansion vessel kit
Cod.3.019135
Including wall fixing bracket.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.
Options
80 litre expansion vessel kit
Cod.3.019139
With support for placing on the floor.
The expansion vessel must be dimensioned according to the content of the solar circuit fluid and the stagnation temperature of the collectors.
Options
Additional 2 kW electric resistance kit for OMNISTOR, INOXSTOR V2 and UB 550/750
Cod.3.020861
Power supply 230 or 400 Vac.
Documentation
Options
Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750
Cod.3.020862
Power supply 230 or 400 Vac.
Documentation
Options
Antifreeze electric heater 300 W
Cod.3.029920
(for external temperatures from 0 °C to -13 °C).
For SOLARSMART.
Options
Automatic valve kit for expansion vessel
Cod.3.023005
As standard for a packs.
Automatically shuts the passage of fluid during maintenance of the expansion vessel.
Options
Basic free-standing 45° installation kit for 1 vertical CP4 XL/M Flat-Plate Collector
Cod.3.022674
The kit includes: 4 profiles , 2 collector side fixing brackets.
Documentation
Options
Connection kit for 1 vertical CP4 XL/M Flat-Plate Collector
Cod.3.022797
The kit includes: fittings for Ø 18 copper pipes and DN 16 and DN, 20 steel pipes, 2 plugs for CP4 XL/M.
(To be used for sets of 1 to 6 collectors in series)
Options
Connection kit for UB Inox 200-2 or UB Inox 120-2 in parallel
Cod.3.022212
Per due UB INOX 120 V2 o due UB INOX 200 V2 in parallelo.
Options
Connection kit for additional vertical CP4 XL/M Flat-Plate Collector
Cod.3.019085
The kit includes: hydraulic fittings to connect up to 3 CP4 XL/M Flat-Plate Collectors in series.
Options
Connection kit for double solar pump stations
Cod.3.021008
The kit includes: hydraulic fittings.
Options
Connection kit for double solar pump stations
Cod.3.020300
The kit includes: hydraulic fittings.
Options
Cover for CP4 M Flat-Plate Collector
Cod.1.028522
Allows to cover the collector to guarantee its integrity until it is filled.
Options
Cover for CP4 XL Flat-Plate Collector
Cod.1.033271
Allows to cover the collector to guarantee its integrity until it is filled.
Options
DN 16 steel pipe connection kit for collectors
Cod.3.019125
The kit includes:
double DN 16 insulated 15 m long steel pipe integrated cable for solar collector temperature probe.
Options
DN 20 steel pipe connection kit for collectors
Cod.3.020354
The kit includes:
double DN 20 insulated 15 m long steel pipe integrated cable for solar collector temperature probe hydraulic fittings for connections.
Options
Double electronic anode kit
Cod.3.025003
For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
Documentation
Options
Double electronic anode kit for OMNISTOR, INOXSTOR V2 and MAGIS HERCULES PRO
Cod.3.030694
Double electronic anode kit for OMNISTOR, INOXSTOR V2 and MAGIS HERCULES PRO
Documentation
Options
Double electronic anode kit for UB INOX 200 V2 and UB INOX SOLAR 200 V2
Cod.3.029643
Double electronic anode kit for UB INOX 200 V2 and UB INOX SOLAR 200 V2
Documentation
Options
Double solar pump station (1-6 l/min) ErP
Cod.3.034597
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Documentation
Options
Double solar pump station (2-12 l/min) ErP
Cod.3.034596
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Documentation
Options
Double solar pump station (8-28 l/min) ErP
Cod.3.034598
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Documentation
Options
Electronic anode kit for Storage Tank Unit up to 500 litres
Cod.3.020344
Can be used instead of magnesium anodes, requires no periodical replacement.
Options
Fixing elements kit for CP4 XL/M Flat-Plate Collector
Cod.3.022922
This kit must always be added when using the kits Code 3.019105 and Code 3.022776.
The kit includes: collector side fixing brackets and 1 intermediate bracket.
The kit includes: collector side fixing brackets and 1 intermediate bracket.
Options
Frame connection kit for additional CP4 XL/M Flat-Plate Collector
Cod.3.022681
The kit includes: 2 brackets.
The kit allows to mechanically connect two frames together when installing more than one collector.
Documentation
Options
Frame on tiles kit for 1 horizontal CP4 XL/M Flat-Plate Collector
Cod.3.022749
The kit includes: 2 horizontal profiles.
(the profiles must be shortened when using CP4 M)
Options
Frame on tiles kit for 1 vertical CP4 XL/M Flat-Plate Collector
Cod.3.022670
The kit includes: 2 horizontal profiles.
Documentation
Options
Frame on tiles kit for 2 vertical CP4 XL/M Flat-Plate Collectors
Cod.3.022671
The kit includes: 2 horizontal profiles.
Documentation
Options
Free-standing 45° installation extension kit for vertical CP4 XL/M Flat-Plate Collector
Cod.3.022677
The kit includes: 2 profiles , 1 fixing clamp with hole , 1 mounting template (to be removed after installation).
Documentation
Options
Free-standing 45° installation kit for 1 Flat-Plate Collector
Cod.3.022750
The kit includes: 4 profiles, 2 collector side fixing brackets.
(the horizontal profiles must be shortened when using CP4 M)
Documentation
Options
INOXSTOR 200 V2
Cod.3.027746
INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Documentation
Options
INOXSTOR 300 V2
Cod.3.027747
INOXSTOR 300 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Documentation
Options
Integration electric heater 1 kW
Cod.3.029921
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
Options
Integration electric heater 2 kW
Cod.3.029922
Recommended when SOLARSMART is directly connected
to user.
For SOLARSMART.
Options
NATURAL SOL by-pass kit
Cod.3.022453
Can be used to empty the storage tank during winter.
Documentation
Options
Pressure - temperature safety valve kit for NATURAL SOL
Cod.3.020342
Setted at 6 bar and 94 °C.
Options
Pressure reducer kit
Cod.3.029919
Connection ¾". 3 bar setting.
For SOLARSMART.
Options
Probe kit for PT 1000 solar collector
Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Options
Recessed frame extension kit for CP4 XL/M Flat-Plate Collector
Cod.3.027736
The kit includes: intermediate frame around collectors.
Documentation
Options
Recessed frame extension kit for CP4 XL/M Flat-Plate Collector
Cod.3.027849
The kit includes: intermediate frame around collectors.
Documentation
Options
Recessed kit for 1 Flat-Plate Collector
Cod.3.027735
The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.
Documentation
Options
Recessed kit for 1 Flat-Plate Collector
Cod.3.027768
The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.
Documentation
Options
Recessed kit for 1 Flat-Plate Collector
Cod.3.027769
The kit includes: special waterproof trays, perimeter frames, waterproofing sheath.
Documentation
Options
Recirculation kit UB Inox 80-2
Cod.3.022198
Only probe pipe.
Options
Recirculation kit UB Inox 120-2
Cod.3.022199
Only probe pipe.
Options
Recirculation kit UB Inox Solar 200-2 and UB Inox 200-2
Cod.3.022200
Only probe pipe.
Documentation
Options
Recirculation pipe kit for 2 UB Inox 120-2 or 2 UB Inox 200-2 in parallel
Cod.3.022201
For 2 UB INOX 120 V2 or 2 UB INOX 200 V2 in parallel.
Options
Sanitary priority 3-way valve kit
Cod.3.020633
Options
Single solar pump station (1-6 l/min) ErP
Cod.3.025662
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Documentation
Options
Single solar pump station (2-12 l/min) ErP
Cod.3.025663
The kit includes: circulation pump, 6 bar safety valve, 0-10 bar pressure gauge, one-way ball valve, thermometer and connection to the safety unit, flow rate regulated and filling and draining valve, filling valve, draining valve, insulation.
1" hydraulic connections, 230 V ~ power supply voltage.
Documentation
Options
Solar panel connection kit for UB Inox 120-2
Cod.3.022197
Including pipes and fittings for connection in template.
Options
Solar panel connection kit for UB Inox 200-2
Cod.3.022195
Including pipes and fittings for connection in template.
Documentation
Options
Solar panel connection kit for UB Inox 200-2 or UB Inox 120-2 in parallel
Cod.3.022196
Including pipes and fittings for connection in template.
Documentation
Options
Solar valve
Cod.3.018911
Allows the connection between combi boiler and solar system.
Available for: VICTRIX Superior TOP, VICTRIX, MAIOR EOLO, NIKE Mini 28 kW Special, MINI NIKE/EOLO and NIKE/EOLO Star.
Documentation
Options
Storage tank probe kit
Cod.3.015268
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
Options
System filling pump station
Cod.3.018742
Ideal for correctly filling the forced circulation solar system with the waterglycol solution.
Options
Tank of glycol for CP4 XL/M Flat-Plate Collectors
Cod.3.028517
The kit includes:
one 20 kg can of glycol and propylene already mixed and ready to use.
Antifreeze protection up to - 25 °C.
Documentation
Options
UB 300 V2
Cod.3.028480
Combined Storage Tank Unit for heating and domestic hot water integration.
The 295 litres Storage Tank Unit is equipped with two concentric coil shaped stainless steel water to water heat exchangers, one of them dedicated to DHW production and the other one fit for energy integration, in case of coupling with solar collector or another energy source.Polyurethane (PU) rigid insulation thick 70 mm (which can bedisassembled in case of necessity).The standard anodic protection system is given by two magnesium anodes, one of them placed in the upper part of the storage and the other inserted in the bottom, close to the flange.
This solution can be easily integrated with its own optional kit.
UB 3000 V2 body is pre-arranged to fix double pump station and to insert electric resistance kit.
Ideal solution for single-family homes, storage tank unit has 5 years conventional warranty.
Documentation
Options
Vent kit and fitting for Ø 22 mm pipe for horizontal CP4 XL/M Flat-Plate Collector
Cod.3.022849
This kit is used in applications with horizontal CP4 XL/M Flat-Plate.
Options
¾" Mixing valve
Cod.3.019099
Range 42-60 °C.
The kit includes:
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 90 °C.
The kit includes:
1 thermostatic mixing valve with a 42 °C - 60 °C adjustment range and maximum inlet temperature of 90 °C.
Available for: VICTRIX Superior TOP, VICTRIX, MAIOR EOLO, NIKE Mini 28 kW Special, MINI NIKE/EOLO, NIKE/EOLO Star, CAESAR 14 and Super CAESAR 17.
Documentation
Options
¾" nut kit for DN 16 steel pipe
Cod.1.027255
For connection to solar collectors.
Options
Ø 18 copper pipe connection kit for collectors
Cod.3.019089
The kit includes:
double Ø 18 mm insulated 15 m long copper pipe integrated cable for solar collector temperature probe.
Options
1,5 kW sanitary electric resistance
Cod.3.024897
Options
1,5 kW sanitary electric resistance kit
Cod.3.029927
for SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 heat pump
Documentation
Options
2 zones kit (1 mixed and 1 direct)
Cod.3.031695
For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2 and MAGIS HERCULES MINI HYDRO 12
Documentation
Options
2,3 kW - DHW integration electric heater kit for MAGIS HERCULES PRO
Cod.3.030862
Documentation
Options
2nd mixed zone kit for MAGIS HERCULES PRO 4-6-9
Cod.3.030855
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
Documentation
Options
2nd mixed zone kit for MAGIS HERCULES PRO 12-14-16
Cod.3.030943
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, mixing valve and
connection pipes.
Documentation
Options
3 kW - Integration electric heater kit
Cod.3.030899
For MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO
Documentation
Options
3 kW integration electric resistance kit for MAGIS PRO V2
Cod.3.030991
For heat pump only plants with MAGIS PRO V2, 3 kW (to be installed inside of the hydronic unit).
Electric power supply 230V-50Hz single phase + earthing
Documentation
Options
3 kW integration electric resistance kit for TRIO PACK ELECTRIC
Cod.3.031937
For TRIO PACK ELECTRIC system ELECTRIC.
Documentation
Options
3-way valve kit
Cod.3.020632
Documentation
Options
3rd mixed zone kit for MAGIS HERCULES PRO 4-6-9
Cod.3.030856
For MAGIS HERCULES PRO 4/6/9.
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
Documentation
Options
3rd mixed zone kit for MAGIS HERCULES PRO 12-14-16
Cod.3.030944
For MAGIS HERCULES PRO 12/14/16 and 12 T/14 T/16 T
Composed by: 1 low consumption pump, 1 mixing valve,
connection pipes and expansion.
Documentation
Options
12 litre system expansion vessel kit
Cod.3.011679
for plants with MAGIS M.
Options
Accessories kit for TRIO HYDRO system ELECTRIC
Cod.3.032748
Includes: system expansion vessel, manometer, D.H.W. 1,5 kW electric resistance and specific relay
Documentation
Options
Additional 2 kW electric resistance kit for OMNISTOR, INOXSTOR V2 and UB 550/750
Cod.3.020861
Power supply 230 or 400 Vac.
Documentation
Options
Additional 2nd mixed zone SUPER TRIO TOP
Cod.3.031186
Additional 2nd mixed zone SUPER TRIO TOP
Composed by 1 low consumption pump, mixing valve and hydraulic connections.
Composed by 1 low consumption pump, mixing valve and hydraulic connections.
Documentation
Options
Additional 5 kW electric resistance kit for UB 1000/1500 and UB 750
Cod.3.020862
Power supply 230 or 400 Vac.
Documentation
Options
Additional mixed 2nd zone kit
Cod.3.027865
Additional mixed 2nd zone kit composed by:
1 low consumption pump, mixing valve and
connection pipes.
All components are insulated
1 low consumption pump, mixing valve and
connection pipes.
All components are insulated
Documentation
Options
Additional mixed 2nd zone kit for TRIO PACK
Cod.3.031483
Documentation
Options
Aesthetic upper cover for DOMUS CONTAINER for SUPER TRIO/SUPER TRIO TOP (Technical box)
Cod.3.030484
Documentation
Options
Anti freeze protection kit -15 °C
Cod.3.017324
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
Anti-scale kit for MAGIS HERCULES PRO
Cod.3.030859
To be installed inside the casing.
Documentation
Options
Anti-scale kit for TRIO PACK
Cod.3.032261
indoor only
Documentation
Options
Antivibration supports (3 pieces)
Cod.3.032854
For MAGIS M
Options
Bottom connection kit for SUPER TRIO TOP
Cod.3.031193
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Documentation
Options
Bracket kit for wall mounting 75 inertial storage tank
Cod.3.027290
Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
Documentation
Options
Buffer tank 15 litres
Cod.3.026304
to be installed in CONTAINER or DOMUS CONTAINER
Documentation
Options
CONTAINER for SUPER TRIO/SUPER TRIO TOP (Recessed frame)
Cod.3.030394
Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 1100 x 495
Documentation
Options
Connection cover kit
Cod.3.034183
For MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
Documentation
Options
Connection kit R32 gas refrigerant circuit
Cod.3.031505
for MAGIS HERCULES PRO 4-6-9
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
Documentation
Options
Connection kit R410Agas refrigerant circuit
Cod.3.031506
for MAGIS HERCULES PRO 12-14-16
Allow an easy connection of the refrigerant
circuit in the case of pipes coming out from the indoor unit
rear wall.
Documentation
Options
Connection kit for R32 circuit for MAGIS PRO V2 and MAGIS COMBO V2
Cod.3.030883
for an easy connection of the refrigerant circuit, even
in the case of pipes coming out from the wall on the
internal unit
Documentation
Options
Connection kit for R32 circuit for TRIO PACK
Cod.3.031966
For connection R32 toward the lower part of the Container
Documentation
Options
Connection kit for R410A circuit
Cod.3.026089
To connect refrigerant gas circuit where internal unit of MAGIS COMBO/PLUS 12-14-16 V2 e MAGIS PRO 12-14-16 V2 is installed to the wall
Documentation
Options
Connection kit for horizontal zones (side connection) for TRIO PACK O
Cod.3.032256
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
Documentation
Options
Connection kit for rear zones (rear connection) for TRIO PACK
Cod.3.032258
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
Documentation
Options
Connection kit for vertical zones (bottom connection) for TRIO PACK
Cod.3.032257
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
Documentation
Options
Connection kit with flexible pipes and shut-off knobs 1"
Cod.3.025954
For MAGIS M4 and 6
Documentation
Options
Connection kit with flexible pipes and shut-off knobs 1" 1/4
Cod.3.032846
For MAGIS M8/12/14/16/18/22/26/30
Documentation
Options
DHW recirculation kit
Cod.3.026169
pump not included
Documentation
Options
DOMUS CONTAINER (technical box)
Cod.3.022167
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Documentation
Options
DOMUS CONTAINER for SUPER TRIO/SUPER TRIO TOP (Technical box)
Cod.3.030393
Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 1160 x 520
Documentation
Options
Dehumidifier back frame kit
Cod.3.022146
Options
Dehumidifier front grille kit
Cod.3.022147
Options
Dehumidifier kit
Cod.3.021529
Only for recessed installation with codes 3.022146 and 3.022147
Documentation
Options
Distribution manifold for 1 direct and 1 mixed temperature zones
Cod.3.026301
Kit to be used without system manager controller.
Dedicated to MAGIS PRO V2 4-6-9, MAGIS COMBO V2 4-6-9, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO 5-8
Documentation
Options
Distribution manifold for 1 direct and 1 mixed temperature zones (only heating)
Cod.3.032265
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI, MAGIS COMBO V2 4-6-9 and MAGIS HERCULES MINI HYDRO 5-8
Documentation
Options
Distribution manifold for 2 direct zones (only heating)
Cod.3.032264
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH and MAGIS COMBO V2 4-6-9.
For 2 direct zones (only heating)
Documentation
Options
Distribution manifold kit for 1 direct and 2 mixed temperature zones
Cod.3.021527
The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each mixed delivery.
Wall-hung or recessed installation. Low consumption pumps.
Wall-hung or recessed installation. Low consumption pumps.
Documentation
Options
Distribution manifold kit for 2 mixed temperature zones
Cod.3.021528
The kit includes an expansion for the system controller for each zone, a 24 Vac transformer and an NTC probe for each delivery.
Wall-hung or recessed installation. Low consumption pumps.
Wall-hung or recessed installation. Low consumption pumps.
Documentation
Options
Double electronic anode kit
Cod.3.025003
For OMNISTOR, INOXSTOR V2, MAGIS HERCULES PRO, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO.
Documentation
Options
External cover kit with acoustical insulation for ZENITAIR-MONO
Cod.3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
Options
HYDRO 3 V2
Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Documentation
Options
HYDRO IN 200
Cod.3.029841
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO 4 V2
Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Options
HYDRO FS 200
Cod.3.028500
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 400
Cod.3.028501
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 600
Cod.3.028502
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 800
Cod.3.028503
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 1000
Cod.3.028505
Floor standing hydronic fancoil
Documentation
Options
HYDRO IN 400
Cod.3.029842
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 600
Cod.3.029843
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 800
Cod.3.029844
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 1000
Cod.3.029845
Wall and ceiling built-in hydronic fancoil
Documentation
Options
INOXSTOR 200 V2
Cod.3.027746
INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Documentation
Options
INOXSTOR 300 V2
Cod.3.027747
INOXSTOR 300 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Documentation
Options
Integration electric resistance kit 2, 4 or 6 kW for heating system
Cod.3.021525
For internal installation
Documentation
Options
Lateral connection kit for SUPER TRIO TOP
Cod.3.031194
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Documentation
Options
MAGIS HERCULES PRO MINI hydraulic connection kit with by-pass
Cod.3.034333
For MAGIS HERCULES PRO MINI
Documentation
Options
MAGIS PRO connection kit
Cod.3.026303
For TRIO V2/MONO V2 with MAGIS PRO V2.
includes: hydraulic and gas R410A and R32 fittings, support bracket for indoor unit of MAGIS PRO and NTC probe for storage tank.
Options
OMNISTOR 300
Cod.3.027910
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
OMNISTOR 500
Cod.3.027911
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
Probe kit for PT 1000 solar collector
Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Options
Rear connection kit for SUPER TRIO TOP
Cod.3.031195
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Documentation
Options
Recessed buffer tank 50 litres
Cod.3.027709
for installations above or at the side of the container
Documentation
Options
Recirculation kit for SUPER TRIO (pump not included)
Cod.3.030483
Documentation
Options
Recirculation kit for SUPER TRIO TOP (pump not included)
Cod.3.031205
Documentation
Options
Recirculation kit with pump
Cod.3.030858
To be installed inside the MAGIS HERCULES PRO internal unit casing
Documentation
Options
Recirculation kit with pump
Cod.3.033217
To be installed inside the MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO internal unit casing
Documentation
Options
Refrigerant R32 connection kit
Cod.3.033211
for MAGIS HERCULES PRO MINI
To connect gas fittings to the rear wall
Documentation
Options
SOLAR CONTAINER (recessed frame)
Cod.3.020166
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Documentation
Options
Safety valve 7 bar and 12 litres expansion vessel kit
Cod.3.025231
For RAPAX 200/300 V3 and 200/300 SOL V3
It can be fixed into wall thanks to brackets (as standard).
It can be fixed into wall thanks to brackets (as standard).
Documentation
Options
Safety valve 7 bar and 12 litres expansion vessel kit
Cod.3.028368
For RAPAX 100 V2
It can be fixed into wall thanks to brackets (as standard).
It can be fixed into wall thanks to brackets (as standard).
Documentation
Options
Shut off knobs with filters for MAGIS HERCULES PRO
Cod.3.030861
Shut off knobs with filters
1" connections (for zones 2 and 3, only); standard for zone 1.
Documentation
Options
Solar kit
Cod.3.024719
Composed by: plate heat exchanger, single solar pump station (with
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).
Options
Solar kit
Cod.3.033210
For MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO
Composed by: plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, shut off knobs, connection pipes, mixing valve, 18 litre solar expansion vessel, temperature probes (for collectors and storage tank).
Documentation
Options
Solar kit for MAGIS HERCULES PRO
Cod.3.030857
For MAGIS HERCULES PRO.
Composed by: plate heat exchanger, single solar pump
station (with low consumption circulation pump), solar
central unit, connection pipes,18 litre solar expansion vessel,
temperature probes (for collectors and storage tank).
N.B.: For solar panel and other solar accessories see the
solar catalogue.
Documentation
Options
Solar kit for OMNISTOR
Cod.3.029723
Composed of: aesthetic cover frame, plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, connection insulated pipes.
Documentation
Options
Solar kit for SUPER TRIO
Cod.3.030482
Solar kit composed by: plate heat exchanger, single solar
pump station (with low consumption circulation
pump), solar central unit, connection pipes,18 litre
solar expansion vessel, temperature probes (for
collectors and storage tank).
pump station (with low consumption circulation
pump), solar central unit, connection pipes,18 litre
solar expansion vessel, temperature probes (for
collectors and storage tank).
Options
Solar kit for SUPER TRIO TOP
Cod.3.031189
Solar kit for SUPER TRIO TOP.
Options
Solar kit for TRIO PACK ELETRIC
Cod.3.031603
Composed of: plate heat exchanger, single solar pump
station (with low consumption ciculation pump), solar
central unit, connection pipes, hydraulic fittings, mixing
valve, 18 litres solar expansion vessel, temperature
probes ( for collectors and storage tank)
station (with low consumption ciculation pump), solar
central unit, connection pipes, hydraulic fittings, mixing
valve, 18 litres solar expansion vessel, temperature
probes ( for collectors and storage tank)
Documentation
Options
Vertical buffer tank with capacity of 50 litres
Cod.3.027539
Documentation
Options
Vertical inertial storage tank 75 litre
Cod.3.027288
Wall-hung (with bracket option kit) or floor-standing installation.
Documentation
Options
Wall mounting brackets for external unit
Cod.3.034758
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
Documentation
Options
ZENITAIR MONO
Cod.3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
Documentation
Options
2 high temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP
Cod.3.025485
Modulating low consumption pumps.
Documentation
Options
2 litres additional expansion vessel
Cod.3.018433
Available for MAGIS VICTRIX ErP, MAGIS HERCULES ErP and for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, AVIO ECO 24, NIKE ECO 24, VICTRIX SUPERIOR ErP/X ErP, MAIOR EOLO, MINI EOLO/NIKE and MINI EOLO/NIKE X.
Options
2 litres additional expansion vessel
Cod.3.017514
Available for: VICTRIX, VICTRIX X.
Options
2 litres additional expansion vessel for VICTRIX SUPERIOR
Cod.3.032168
For VICTRIX SUPERIOR.
Documentation
Options
2 low temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP
Cod.3.025487
Modulating low consumption pumps.
Documentation
Options
Additional low temperature zone kit for HERCULES CONDENSING ABT 32 ErP
Cod.3.025486
Modulating low consumption pump.
Documentation
Options
All-purpose connection kit for wall-hung combi boilers
Cod.3.011667
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
Documentation
Options
Anti freeze protection kit -15 °C
Cod.3.017324
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
Anti freeze protection kit -15 °C
Cod.3.031804
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
Anti-freeze protection kit -15 °C for VICTRIX SUPERIOR ErP/X ErP
Cod.3.015348
Options
Anti-scale kit
Cod.3.013499
For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24
Documentation
Options
Anti-scale kit for HERCULES Condensing ErP
Cod.3.019999
Documentation
Options
Anti-scale kit for VICTRIX SUPERIOR, MAIOR TT, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2
Cod.3.017323
For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.
Documentation
Options
Bottom cover kit
Cod.3.028656
Aesthetic frame (240 mm height) that covers connections zone and the main
option kits for wall-hung condensing boilers IDEAL FOR REPLACEMENT
Documentation
Options
Bottom cover kit
Cod.3.030438
Aestethics frame (250 mm height, 407 mm depth) that covers connections zone and the main option kits
Options
Bottom cover kit for VICTRIX SUPERIOR
Cod.3.032167
for VICTRIX SUPERIOR
Documentation
Options
Bottom cover kit for VICTRIX ZEUS 25-32 code 3.030323
Cod.3.030323
For VICTRIX ZEUS 25-32.
Documentation
Options
Clock kit for Recirculation
Cod.3.015431
To be used to manage the recirculation pump.
Documentation
Options
Condensate discharge pump kit
Cod.3.026841
For floor standing boilers: compact condensate drain pump kit.
Documentation
Options
Condensate discharge pump kit
Cod.3.026374
For wall-hung boilers: compact condensate drain pump kit.
Documentation
Options
Condensate neutralizer kit
Cod.3.019857
Necessary to neutralize the acidity of the condensation. Inclusive of granulate.
Options
Connection kit for VICTRIX X TT, VICTRIX X TT ErP, VICTRIX EXA 24 X ErP and VICTRIX TERA PLUS V2 EU
Cod.3.024907
For the installation of heating only boilers.
Documentation
Options
Connection kit for VICTRIX Zeus 26
Cod.3.020505
Documentation
Options
Cover kit for VICTRIX EXA ErP/ EXA X ErP
Cod.3.026010
For "B23" configuration.
Documentation
Options
Cover kit for VICTRIX OMNIA
Cod.3.028415
For external installations, in partially protected places
Documentation
Options
Cover kit for VICTRIX SUPERIOR
Cod.3.032166
For partially protected area installation
Documentation
Options
Cover kit for VICTRIX ZEUS SUPERIOR
Cod.3.030077
For VICTRIX ZEUS SUPERIOR
Options
D.H.W. expansion vessel for VICTRIX Zeus
Cod.3.020400
Options
DIM 2 ZONES ErP
Cod.3.025607
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold, 2 low-consumption pumps and electronic board.
Hydraulic manifold, 2 low-consumption pumps and electronic board.
Documentation
Options
DIM 3 ZONES ErP
Cod.3.025608
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.
Documentation
Options
DIM BASIC ErP
Cod.3.025606
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold and 1 low-consumption pump.
Hydraulic manifold and 1 low-consumption pump.
Documentation
Options
DIM H-2LT ErP
Cod.3.025610
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Documentation
Options
DIM H-LT ErP
Cod.3.025609
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.
Documentation
Options
High temperature second zone kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP
Cod.3.025484
Modulating low consumption pump.
Documentation
Options
Low temperature second zone kit for HERCULES SOLAR 26 2 ErP, HERCULES CONDENSING ErP
Cod.3.025483
Modulating low consumption pump.
Documentation
Options
Magnetic cyclone filter kit
Cod.3.024176
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
Documentation
Options
Probe kit for PT 1000 solar collector
Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Options
Recirculation kit
Cod.3.015380
Domestic hot water pump included.
Available for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24.
Documentation
Options
Recirculation kit
Cod.3.020001
Domestic hot water pump included.
Available for: HERCULES Condensing ErP and HERCULES SOLAR 26 2 ErP.
Documentation
Options
Recirculation kit for VICTRIX ZEUS Superior kW
Cod.3.013498
Only probe pipe, pump is not included.
Available for VICTRIX Zeus Superior kW.
Documentation
Options
Recirculation kit for VICTRIX Zeus
Cod.3.012944
Only probe pipe, not pump included.
Available for VICTRIX Zeus.
Options
Shut off knobs
Cod.3.5324
For wall-hung outdoor boilers.
Options
Shut off knobs with filter
Cod.3.015854
For wall-hung boilers.
Documentation
Options
Shut-off knobs
Cod.3.014948
For DIM ErP
Options
Solar panel kit for HERCULES Condensing ErP
Cod.3.019998
It includes pipes and fittings. For connecting 1 Flat-Plate or Vacuum Collector.
It must be used coupled with the typical BASIC SOL TOP and BASIC SOL LUX TOP packs.
Options
Storage tank connection kit for VICTRIX Superior TOP 32 X E
Cod.3.022848
Documentation
Options
Storage tank connection kit for VICTRIX X TT ErP
Cod.3.024609
Storage tank connection kit for VICTRIX X TT ErP, VICTRIX EXA 24 X ErP, VICTRIX X TT and VICTRIX MAIOR 35 X TT ErP.
Documentation
Options
Storage tank probe kit
Cod.3.015268
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
Options
kit containing bottom guard for condensing boilers
Cod.3.027341
For wall-hung condensing boilers.
Documentation
Options
2 high temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP
Cod.3.025485
Modulating low consumption pumps.
Documentation
Options
2 low temperature zones kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP
Cod.3.025487
Modulating low consumption pumps.
Documentation
Options
Aesthetic upper cover DOMUS CONTAINER
Cod.3.027175
Options
Anti freeze protection kit -15 °C
Cod.3.017324
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
Anti scale kit
Cod.3.020628
Documentation
Options
Anti-scale kit for HERCULES SOLAR
Cod.3.020498
For HERCULES SOLAR
Documentation
Options
Bottom connection kit
Cod.3.020575
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
Documentation
Options
Condensate discharge pump kit
Cod.3.026841
For floor standing boilers: compact condensate drain pump kit.
Documentation
Options
DHW recirculation kit
Cod.3.026169
pump not included
Documentation
Options
DOMUS CONTAINER (technical box)
Cod.3.022167
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Documentation
Options
High temperature second zone kit for HERCULES SOLAR 26 ErP, HERCULES CONDENSING ErP
Cod.3.025484
Modulating low consumption pump.
Documentation
Options
Lateral connection kit
Cod.3.020574
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
Documentation
Options
Low temperature second zone kit for HERCULES SOLAR 26 2 ErP, HERCULES CONDENSING ErP
Cod.3.025483
Modulating low consumption pump.
Documentation
Options
Rear connection kit
Cod.3.020630
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
Documentation
Options
Recirculation kit
Cod.3.030689
Domestic hot water pump included.
Available for: HERCULES Condensing ErP and HERCULES SOLAR 26 2 ErP.
Documentation
Options
Recirculation kit
Cod.3.020001
Domestic hot water pump included.
Available for: HERCULES Condensing ErP and HERCULES SOLAR 26 2 ErP.
Documentation
Options
SOLAR CONTAINER (recessed frame)
Cod.3.020166
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Documentation
Options
Solar connection kit for HERCULES SOLAR 26 ErP
Cod.3.021382
For HERCULES SOLAR 26 ErP
For alignment of solar circuit in template.
Documentation
Options
2 litres additional expansion vessel
Cod.3.018433
Available for MAGIS VICTRIX ErP, MAGIS HERCULES ErP and for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, AVIO ECO 24, NIKE ECO 24, VICTRIX SUPERIOR ErP/X ErP, MAIOR EOLO, MINI EOLO/NIKE and MINI EOLO/NIKE X.
Options
2 litres additional expansion vessel
Cod.3.017514
Available for: VICTRIX, VICTRIX X.
Options
2 zones kit (1 mixed and 1 direct)
Cod.3.031695
For MAGIS PRO 12-14-16 V2, MAGIS COMBO/PLUS 12-14-16 V2 and MAGIS HERCULES MINI HYDRO 12
Documentation
Options
2 zones kit with motorized valves MAGIS VICTRIX
Cod.3.023769
Dimensions (H x W x P) 220 x 350 x 230 mm.
Documentation
Options
3-way valve kit
Cod.3.020632
Documentation
Options
Additional 2nd mixed zone SUPER TRIO TOP
Cod.3.031186
Additional 2nd mixed zone SUPER TRIO TOP
Composed by 1 low consumption pump, mixing valve and hydraulic connections.
Composed by 1 low consumption pump, mixing valve and hydraulic connections.
Documentation
Options
Additional mixed 2nd zone kit
Cod.3.027865
Additional mixed 2nd zone kit composed by:
1 low consumption pump, mixing valve and
connection pipes.
All components are insulated
1 low consumption pump, mixing valve and
connection pipes.
All components are insulated
Documentation
Options
Additional mixed 2nd zone kit for TRIO PACK
Cod.3.031483
Documentation
Options
Additional mixed zone kit for MAGIS HERCULES
Cod.3.023314
Installabile all'interno di MAGIS HERCULES ErP, il kit comprende circolatore a basso consumo, valvola miscelatrice, espansione e relè terza zona.
Documentation
Options
Aesthetic upper cover DOMUS CONTAINER
Cod.3.027175
Options
Aesthetic upper cover for DOMUS CONTAINER for SUPER TRIO/SUPER TRIO TOP (Technical box)
Cod.3.030484
Documentation
Options
All-purpose connection kit for wall-hung combi boilers
Cod.3.011667
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
Documentation
Options
Anti freeze protection kit -15 °C
Cod.3.017324
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
Anti freeze protection kit -15 °C
Cod.3.031804
Anti freeze protection kit -15 °C
For TT versions, VICTRIX SUPERIOR/PLUS, VICTRIX ZEUS, VICTRIX EXA, TERA VIP, VICTRIX TERA/PLUS, OMNIA, MAGIS PRO V2 and MAGIS COMBO V2.
Documentation
Options
Anti scale kit
Cod.3.020628
Documentation
Options
Anti-freeze protection kit MAGIS VICTRIX
Cod.3.023770
Until -15 °C
Options
Anti-scale kit for TRIO PACK
Cod.3.032261
indoor only
Documentation
Options
Anti-scale kit for VICTRIX SUPERIOR, MAIOR TT, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2
Cod.3.017323
For VICTRIX SUPERIOR, MAIOR TT ErP, TT ErP, TT, EXA ErP, TERA, TERA VIP and MAGIS COMBO V2.
Documentation
Options
Anti-scale kit for MAGIS HERCULES ErP
Cod.3.023316
For MAGIS HERCULES ErP.
Documentation
Options
Anti-scale kit for MAGIS VICTRIX
Cod.3.023310
Only for internal installation of MAGIS VICTRIX
Documentation
Options
Bottom connection kit
Cod.3.020575
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
Documentation
Options
Bottom connection kit for SUPER TRIO TOP
Cod.3.031193
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Documentation
Options
Bracket kit for wall mounting 75 inertial storage tank
Cod.3.027290
Bracket kit for wall mounting inertial storage tank 75 litres code 3.027288.
Documentation
Options
CONTAINER for SUPER TRIO/SUPER TRIO TOP (Recessed frame)
Cod.3.030394
Recessed frame for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 or MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 1100 x 495
Documentation
Options
Clock kit for Recirculation
Cod.3.015431
To be used to manage the recirculation pump.
Documentation
Options
Condensate antifreeze heating cable kit for external unit
Cod.3.030930
Suitable to extend external unit antifreeze protection up to -15 °C.
Documentation
Options
Condensate discharge pump kit
Cod.3.026841
For floor standing boilers: compact condensate drain pump kit.
Documentation
Options
Condensate discharge pump kit
Cod.3.026374
For wall-hung boilers: compact condensate drain pump kit.
Documentation
Options
Condensate neutralizer kit
Cod.3.019857
Necessary to neutralize the acidity of the condensation. Inclusive of granulate.
Options
Connection kit for R32 circuit for MAGIS PRO V2 and MAGIS COMBO V2
Cod.3.030883
for an easy connection of the refrigerant circuit, even
in the case of pipes coming out from the wall on the
internal unit
Documentation
Options
Connection kit for R32 circuit for TRIO PACK
Cod.3.031966
For connection R32 toward the lower part of the Container
Documentation
Options
Connection kit for R410A circuit
Cod.3.026089
To connect refrigerant gas circuit where internal unit of MAGIS COMBO/PLUS 12-14-16 V2 e MAGIS PRO 12-14-16 V2 is installed to the wall
Documentation
Options
Connection kit for horizontal zones (side connection) for TRIO PACK O
Cod.3.032256
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
Documentation
Options
Connection kit for rear zones (rear connection) for TRIO PACK
Cod.3.032258
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
Documentation
Options
Connection kit for vertical zones (bottom connection) for TRIO PACK
Cod.3.032257
including fittings, 4 shut-off knobs and predisposition to
insert the “Y" filters for zone 1 and 2
Documentation
Options
Connection kit with flexible pipes and shut-off knobs 1"
Cod.3.025954
For MAGIS M4 and 6
Documentation
Options
Cover kit for MAGIS COMBO 4/6/9 V2
Cod.3.027082
Cover kit for MAGIS COMBO 4/6/9 V2
Documentation
Options
Cover kit for MAGIS COMBO 12-14-16 V2
Cod.3.031977
Cover kit for MAGIS COMBO 12-14-16 V2
Documentation
Options
DHW recirculation kit
Cod.3.026169
pump not included
Documentation
Options
DIM 2 ZONES ErP
Cod.3.025607
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold, 2 low-consumption pumps and electronic board.
Hydraulic manifold, 2 low-consumption pumps and electronic board.
Documentation
Options
DIM 3 ZONES ErP
Cod.3.025608
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.
Documentation
Options
DIM BASIC ErP
Cod.3.025606
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold and 1 low-consumption pump.
Hydraulic manifold and 1 low-consumption pump.
Documentation
Options
DIM H-2LT ErP
Cod.3.025610
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Documentation
Options
DIM H-LT ErP
Cod.3.025609
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.
Documentation
Options
DOMUS CONTAINER (technical box)
Cod.3.022167
Technical box for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems for indoor installations. It allows the housing of the main components (except for the AUDAX heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 975 x 365
Documentation
Options
DOMUS CONTAINER for SUPER TRIO/SUPER TRIO TOP (Technical box)
Cod.3.030393
Technical box for solutions SUPER TRIO/SUPER TRIO TOP with MAGIS PRO V2 and MAGIS COMBO PLUS.
is the first of the main components of SUPER TRIO/SUPER TRIO TOP systems for indoor installations. It allows the housing of the main components (except for the heat pump).
It blends easily into any room and does not require no brickwork for subsequent installation of generators, hydraulic components and flues (if any).
Front opening enables total system maintenance.
Dimensions (H x W x D) mm 2110 x 1160 x 520
Documentation
Options
Dehumidifier back frame kit
Cod.3.022146
Options
Dehumidifier front grille kit
Cod.3.022147
Options
Dehumidifier kit
Cod.3.021529
Only for recessed installation with codes 3.022146 and 3.022147
Documentation
Options
Distribution manifold for 1 direct and 1 mixed temperature zones
Cod.3.026301
Kit to be used without system manager controller.
Dedicated to MAGIS PRO V2 4-6-9, MAGIS COMBO V2 4-6-9, MAGIS HERCULES PRO MINI and MAGIS HERCULES MINI HYDRO 5-8
Documentation
Options
Distribution manifold for 1 direct and 1 mixed temperature zones (only heating)
Cod.3.032265
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI, MAGIS COMBO V2 4-6-9 and MAGIS HERCULES MINI HYDRO 5-8
Documentation
Options
Distribution manifold for 2 direct zones (only heating)
Cod.3.032264
Dedicated to MAGIS PRO V2 4-6-9, MAGIS HERCULES PRO MINI 6-9/EH and MAGIS COMBO V2 4-6-9.
For 2 direct zones (only heating)
Documentation
Options
External cover kit with acoustical insulation for ZENITAIR-MONO
Cod.3.030636
Anti-insect net and anti-wind in pre-painted steel, alternative to the one available with ZENITAIR-MONO.
Options
HYDRO 3 V2
Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Documentation
Options
HYDRO IN 200
Cod.3.029841
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO 4 V2
Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Options
HYDRO FS 200
Cod.3.028500
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 400
Cod.3.028501
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 600
Cod.3.028502
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 800
Cod.3.028503
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 1000
Cod.3.028505
Floor standing hydronic fancoil
Documentation
Options
HYDRO IN 400
Cod.3.029842
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 600
Cod.3.029843
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 800
Cod.3.029844
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 1000
Cod.3.029845
Wall and ceiling built-in hydronic fancoil
Documentation
Options
Horizontal buffer tank with capacity of 25 litres
Cod.3.030915
Suitable to install it under external unit it is necessary adapter kit code 3.030915
Documentation
Options
Horizontal buffer tank with capacity of 25 litres
Cod.3.027842
For AUDAX heat pump.
Documentation
Options
Hydronic kit for MAGIS COMBO PLUS IN SOLAR CONTAINER COMBO
Cod.3.027867
Composed by:
• DHW storage tank in stainless steel with double
coil 160 litres of capacity (class C)
• hydraulic distribution unit for one zone that
includes: hydraulic manifold, 1 low consumption
pump, DHW expansion vessel 8 litres, safety valve 8
bar and thermostatic mixing valve.
All components are insulated
• DHW storage tank in stainless steel with double
coil 160 litres of capacity (class C)
• hydraulic distribution unit for one zone that
includes: hydraulic manifold, 1 low consumption
pump, DHW expansion vessel 8 litres, safety valve 8
bar and thermostatic mixing valve.
All components are insulated
Documentation
Options
INOXSTOR 200 V2
Cod.3.027746
INOXSTOR 200 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm thick)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Documentation
Options
INOXSTOR 300 V2
Cod.3.027747
INOXSTOR 300 V2
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Stainless steel storage tank units for DHW
Individual solar components
The range of new INOXSTOR stainless steel solar
storage tanks, is ideal to contain domestic hot water
with an inspection flange at the lower part.
The storage tanks are equipped with:
• 2 stainless steel coils water/water heat exchangers
• 2 probe-supports and NTC probe for Immergas
boiler connection < 35 kW
• thermometer
• double magnesium anode
• suitable flexible insulation which can be
disassembled (6 cm)
• pre-arranged to fix pump station to the body of the
storage tank
• pre-arranged to double electronic anode (optional)
code 3.025003
The use of this storage tank unit involves the installation of an appropriately
sized DHW expansion vessel and safety valve, not included in the supply.
Documentation
Options
Lateral connection kit
Cod.3.020574
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
Documentation
Options
Lateral connection kit for SUPER TRIO TOP
Cod.3.031194
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Documentation
Options
MAGIS COMBO 12-14-16 PLUS V2 connection kit for SUPER TRIO TOP
Cod.3.031699
Per soluzioni MAGIS COMBO PLUS 12-14-16 con SUPER TRIO TOP.
Documentation
Options
MAGIS COMBO PLUS with SUPER TRIO connection kit
Cod.3.030599
Composed by: electrical wiring, antifreeze heating cable and NTC probe for storage tank
Documentation
Options
Magnetic cyclone filter kit
Cod.3.024176
Magnetic cyclone filter kit to prevent system ferrous residual (only for internal installation).
Available for wall-hung condensing boilers.
Documentation
Options
OMNISTOR 300
Cod.3.027910
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
OMNISTOR 500
Cod.3.027911
Ideal for connection to heat pumps.
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
The range of new OMNISTOR stainless steel storage
tanks, is ideal to contain domestic hot water with an
inspection flange at the lower part.
The storage tanks are equipped with:
• 1 stainless steel coils water/water heat exchanger
with oversized coil
• 2 probe-supports and NTC probe for Immergas heat
pump connection
• Thermometer
• Double magnesium anode
• Suitable flexible insulation which can be
disassembled (6 cm thick on OMNISTOR 300 and 8
cm thick on OMNISTOR 500)
• Pre-arranged to fix pump station to the body of the
storage tank with option kit (maximum 4 solar flat
plate-collectors)
• Pre-arranged to double electronic anode (option)
code 3.025003
Documentation
Options
Plates heat exchanger kit for AUDAX connection to MAGIS HERCULES
Cod.3.023355
To be installed inside MAGIS HERCULES ErP, to separate AUDAX TOP ErP from the boiler.
Low consumption pump and connection pipes as standard.
Documentation
Options
Rear connection kit
Cod.3.020630
To be installed inside of DOMUS CONTAINER or SOLAR CONTAINER.
Documentation
Options
Rear connection kit for SUPER TRIO TOP
Cod.3.031195
To be installed inside of DOMUS CONTAINER or CONTAINER for SUPER TRIO TOP
Documentation
Options
Recessed buffer tank 50 litres
Cod.3.027709
for installations above or at the side of the container
Documentation
Options
Recirculation kit for SUPER TRIO (pump not included)
Cod.3.030483
Documentation
Options
Recirculation kit for SUPER TRIO TOP (pump not included)
Cod.3.031205
Documentation
Options
Recirculation kit with pump for MAGIS HERCULES
Cod.3.023315
It's possible install this kit inside MAGIS HERCULES.
Documentation
Options
SOLAR CONTAINER (recessed frame)
Cod.3.020166
Recessed frame for solutions TRIO V2 and TRIO MONO V2.
is the first of the main components of TRIO V2/TRIO MONO V2 systems.
It allows the housing of the main components (except for the AUDAX heat pump.
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any).
Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 350
Documentation
Options
SOLAR CONTAINER COMBO (Recessed frame)
Cod.3.028187
Recessed frame for solutions MAGIS COMBO PLUS.
is the first of the main components of MAGIS COMBO PLUS with SOLAR CONTAINER COMBO solutions.
It allows the housing of the main components (except for the heat pump).
It can be ordered and installed during the building planning stage and provides the installer with all the system features for subsequent installation of generators, hydraulic parts and flues (if any). Front access enables total maintenance of the system.
Dimensions (H x W x D) mm 2200 x 950 x 430
Documentation
Options
Shut off knobs
Cod.3.5324
For wall-hung outdoor boilers.
Options
Shut off knobs with filter
Cod.3.015854
For wall-hung boilers.
Documentation
Options
Solar connection kit for MAGIS HERCULES
Cod.3.023339
To be installaed inside of MAGIS HERCULES ErP.
Documentation
Options
Solar kit
Cod.3.024719
Composed by: plate heat exchanger, single solar pump station (with
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).
low consumption circulation pump), solar central unit, connection
pipes,12 litre solar expansion vessel, temperature probes (for
collectors and storage tank).
Options
Solar kit for OMNISTOR
Cod.3.029723
Composed of: aesthetic cover frame, plate heat exchanger, single solar pump station (with low consumption circulation pump), solar central unit, connection insulated pipes.
Documentation
Options
Solar kit for SUPER TRIO
Cod.3.030482
Solar kit composed by: plate heat exchanger, single solar
pump station (with low consumption circulation
pump), solar central unit, connection pipes,18 litre
solar expansion vessel, temperature probes (for
collectors and storage tank).
pump station (with low consumption circulation
pump), solar central unit, connection pipes,18 litre
solar expansion vessel, temperature probes (for
collectors and storage tank).
Options
Solar kit for SUPER TRIO TOP
Cod.3.031189
Solar kit for SUPER TRIO TOP.
Options
Solar kit for TRIO PACK ELETRIC
Cod.3.031603
Composed of: plate heat exchanger, single solar pump
station (with low consumption ciculation pump), solar
central unit, connection pipes, hydraulic fittings, mixing
valve, 18 litres solar expansion vessel, temperature
probes ( for collectors and storage tank)
station (with low consumption ciculation pump), solar
central unit, connection pipes, hydraulic fittings, mixing
valve, 18 litres solar expansion vessel, temperature
probes ( for collectors and storage tank)
Documentation
Options
Vertical buffer tank with capacity of 50 litres
Cod.3.027539
Documentation
Options
Vertical inertial storage tank 75 litre
Cod.3.027288
Wall-hung (with bracket option kit) or floor-standing installation.
Documentation
Options
Wall mounting brackets for external unit
Cod.3.022154
For outdoor unit of VICTRIX HYBRID.
Documentation
Options
Wall mounting brackets for external unit
Cod.3.034758
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
Documentation
Options
ZENITAIR MONO
Cod.3.030601
Decentralised mechanical ventilation unit, easy to install, with alternate flow and heat recovery core.
Multifunction remote controller, with LCD display to visualise the status of the unit supplied as standard.
Documentation
Options
kit containing bottom guard for condensing boilers
Cod.3.027341
For wall-hung condensing boilers.
Documentation
Options
2-way group valve kit
Cod.3.028507
Composed of automatic valve with thermoelectric head and holder to balance the plant load losses.
Options
3-way group valve kit
Cod.3.028508
Composed of three-way diverter valve with thermoelectric head, by-pass tube and holder to balance plant load losses.
Options
90° bended duct for HYDRO IN 200
Cod.3.029856
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming from the terminal, towards the nozzle placed at right angles to the air outlet.
Options
90° bended duct for HYDRO IN 400
Cod.3.029857
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
Options
90° bended duct for HYDRO IN 600
Cod.3.029858
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
from the terminal, towards the nozzle placed at right angles to the air outlet.
Options
90° bended duct for HYDRO IN 800
Cod.3.029859
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
from the terminal, towards the nozzle placed at right angles to the air outlet.
Options
90° bended duct for HYDRO IN 1000
Cod.3.029860
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
from the terminal, towards the nozzle placed at right angles to the air outlet.
Options
Air flow aluminum grill with curved profile for HYDRO IN 200
Cod.3.029891
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation. It allows to convey the air flow coming
from the terminal, towards the nozzle placed at right angles to the air outlet.
from the terminal, towards the nozzle placed at right angles to the air outlet.
Options
Air flow aluminum grill with curved profile for HYDRO IN 400
Cod.3.029892
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
Options
Air flow aluminum grill with curved profile for HYDRO IN 600
Cod.3.029893
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
Options
Air flow aluminum grill with curved profile for HYDRO IN 800
Cod.3.029894
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
Options
Air flow aluminum grill with curved profile for HYDRO IN 1000
Cod.3.029895
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
Made of aluminum. The geometry of the fins is designed to allow a comfortable flow of air.
Options
Air flow aluminum grill with straight profile for HYDRO IN 200
Cod.3.029861
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
Options
Air flow aluminum grill with straight profile for HYDRO IN 400
Cod.3.029862
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
Options
Air flow aluminum grill with straight profile for HYDRO IN 600
Cod.3.029863
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
Options
Air flow aluminum grill with straight profile for HYDRO IN 600
Cod.3.029864
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
Options
Air flow aluminum grill with straight profile for HYDRO IN 1000
Cod.3.029865
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
In aluminum with double row of fins for adjusting both horizontal and vertical air flow.
Options
Air intake aluminum grill with curved profile for HYDRO IN 200
Cod.3.029871
Kit for recessed installation in false ceiling with intake and airflow at the bottomIn
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
Options
Air intake aluminum grill with curved profile for HYDRO IN 400
Cod.3.029872
Kit for recessed installation in false ceiling with intake and airflow at the bottom.
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
Options
Air intake aluminum grill with curved profile for HYDRO IN 600
Cod.3.029873
Kit for recessed installation in false ceiling with intake and airflow at the bottom
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
In aluminum. The curved profile completely masks the interior providing more elegance to the application.
Options
Air intake aluminum grill with curved profile for HYDRO IN 800
Cod.3.029874
Kit for recessed installation in false ceiling with intake and airflow at the bottomIn aluminum.
The curved profile completely masks the interior providing more elegance to the application.
Options
Air intake aluminum grill with curved profile for HYDRO IN 1000
Cod.3.029875
Kit for recessed installation in false ceiling with intake and airflow at the bottomIn aluminum.
The curved profile completely masks the interior providing more elegance to the application.
Options
Air intake aluminum grill with straight profile for HYDRO IN 200
Cod.3.029866
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing
Options
Air intake aluminum grill with straight profile for HYDRO IN 400
Cod.3.029867
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing
Options
Air intake aluminum grill with straight profile for HYDRO IN 600
Cod.3.029868
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Options
Air intake aluminum grill with straight profile for HYDRO IN 600
Cod.3.029869
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Options
Air intake aluminum grill with straight profile for HYDRO IN 1000
Cod.3.029870
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Options
Air intake suction duct for HYDRO IN 200
Cod.3.029846
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
Options
Air intake suction duct for HYDRO IN 400
Cod.3.029847
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
Options
Air intake suction duct for HYDRO IN 600
Cod.3.029848
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom.
Options
Air intake suction duct for HYDRO IN 800
Cod.3.029849
Kit for recessed installation in false ceiling with bottom air intake and horizontal throwing and with intake and airflow at the bottom
Options
Air intake suction duct for HYDRO IN 1000
Cod.3.029850
Kit for recessed installation in false ceiling with bottom air intake and horizontal and with intake and airflow at the bottom
Options
Casing cover panel with intake air grill for HYDRO IN 200
Cod.3.029881
Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 772 x 9 mm
Options
Casing cover panel with intake air grill for HYDRO IN 400
Cod.3.029882
Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
Options
Casing cover panel with intake air grill for HYDRO IN 600
Cod.3.029883
Kit for wall built-in installation.
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 1172 x 9 mm.
Options
Casing cover panel with intake air grill for HYDRO IN 800
Cod.3.029884
Kit for wall built-in installation.
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 1372 x 9 mm.
Options
Casing cover panel with intake air grill for HYDRO IN 1000
Cod.3.029885
Kit for wall built-in installation
RAL 9003 opaque white colour, including air intake grill and adjustable air flow fin.
Dimensions (H x W x frame thickness) 754 x 1572 x 9 mm
Options
Ceiling casing cover panel with accessible air grill for HYDRO IN 600
Cod.3.029888
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 1172 x 9 mm
Options
Ceiling casing cover panel with accessible air grill for HYDRO IN 800
Cod.3.029889
Kit for ceiling built-in installation.
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 1372 x 9 mm.
Options
Ceiling casing cover panel with accessible air grill for HYDRO IN 1000
Cod.3.029890
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 1572 x 9 mm
Options
Ceiling casing cover panel with accessible air grill for HYDRO IN 2000
Cod.3.029886
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 772 x 9 mm
Options
Ceiling casing cover panel with accessible air grill for HYDRO IN 4000
Cod.3.029887
Kit for ceiling built-in installation
RAL 9003 opaque white colour, including air intake grill.
Dimensions (H x W x frame thickness) 754 x 972 x 9 mm
Options
Connection cable to shift water connections from left to right
Cod.3.029834
to be used in case of reversibility of the hydraulic pipe connections on the right side, rotating the battery 180°
Options
Connection kit for HYDRO 3/4 left exit
Cod.3.029520
To be used in case of left side piping.
Arrangement box recessed for pipes is needed.
Arrangement box recessed for pipes is needed.
Options
HYDRO 3 V2
Cod.3.033625
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Documentation
Options
HYDRO IN 200
Cod.3.029841
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO 4 V2
Cod.3.033626
Wall-hung hydronic fancoil with LCD remote control and 3-way valve with micro switch on-off, as standard
Options
HYDRO FS 200
Cod.3.028500
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 400
Cod.3.028501
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 600
Cod.3.028502
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 800
Cod.3.028503
Floor standing hydronic fancoil
Documentation
Options
HYDRO FS 1000
Cod.3.028505
Floor standing hydronic fancoil
Documentation
Options
HYDRO IN 400
Cod.3.029842
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 600
Cod.3.029843
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 800
Cod.3.029844
Wall and ceiling built-in hydronic fancoil
Documentation
Options
HYDRO IN 1000
Cod.3.029845
Wall and ceiling built-in hydronic fancoil
Documentation
Options
Sheet metal casing for HYDRO IN 200
Cod.3.029876
Kit for wall built-in and ceiling built-in installation.
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 715 x 142 mm.
Documentation
Options
Sheet metal casing for HYDRO IN 400
Cod.3.029877
Kit for wall built-in and ceiling built-in installation
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 915 x 142 mm
Documentation
Options
Sheet metal casing for HYDRO IN 600
Cod.3.029878
Kit for wall built-in and ceiling built-in installation
In zinc-coated metal sheet, designed to be inserted in the ceiling in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 1115 x 142 mm.
Documentation
Options
Sheet metal casing for HYDRO IN 800
Cod.3.029879
Kit for wall built-in and ceiling built-in installation.
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 1315 x 142 mm.
Documentation
Options
Sheet metal casing for HYDRO IN 1000
Cod.3.029880
Kit for wall built-in and ceiling built-in installation.
In zinc-coated metal sheet, designed to be inserted in the walls in which to house HYDRO IN.
Dimensions (H x W x D) 725 x 1515 x 142 mm.
Documentation
Options
Sheet metal feet kit
Cod.3.028506
Ideal to cover pipes from the floor.
Options
Variable lenght air flow duct for HYDRO IN 200
Cod.3.029851
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
Options
Variable lenght air flow duct for HYDRO IN 400
Cod.3.029852
Kit for ceiling built-in and for recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
Options
Variable lenght air flow duct for HYDRO IN 600
Cod.3.029853
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
Options
Variable lenght air flow duct for HYDRO IN 800
Cod.3.029854
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwing.
Adjustable to adapt to the installation. Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
Options
Variable lenght air flow duct for HYDRO IN 1000
Cod.3.029855
Kit for ceiling built-in and recessed installation in false ceiling with bottom air intake and horizontal throwingAdjustable to adapt to the installation.
Made of zinc-coated sheet and internally covered with insulation to avoid condensation.
Options
Adapter kit VICTRIX PRO 35/55/60/68/80 V2
Cod.3.023966
for replacement of VICTRIX 50 and 75 versions in single wall unit
configuration
Documentation
Options
Anti freeze protection kit -15 °C VICTRIX PRO V2
Cod.3.034125
Usable in outdoor installations for minimum temperature as low as -15 °C.
Options
Condensate discharge pump kit
Cod.3.020002
For single VICTRIX PRO V2
To be used in case of opposite slope between siphon and discharge
It can only be installed inside the building and outside the appliance
Documentation
Options
Condensate neutralizer kit
Cod.3.019857
Necessary to neutralize the acidity of the condensation. Inclusive of granulate.
Options
Condensate neutralizer kit for cascade installation
Cod.3.019464
Necessary to neutralize the acidity of the condensation.
Inclusive of granulate.
Inclusive of granulate.
Documentation
Options
Condensate neutralizer kit until 80 kW
Cod.3.033687
Necessary to neutralize the acidity of the condensation. Inclusive of granulate.
Options
Condensate neutralizer until 180 kW
Cod.3.033688
Necessary to neutralize the acidity of the condensation. Inclusive of granulate.
Options
Condensate neutralizer until 1500 kW
Cod.3.023662
necessary to neutralize the acidity of the condensation. Inclusive of
granulate.
Options
Cover kit IPX5D
Cod.3.033670
for VICTRIX PRO 35/55/60/68/80 V2
Documentation
Options
Cover kit IPX5D
Cod.3.033671
for VICTRIX PRO 100/120 V2
Documentation
Options
Cover kit IPX5D
Cod.3.033672
for VICTRIX PRO 150 V2
Documentation
Options
Cover kit IPX5D
Cod.3.033689
For VICTRIX PRO 180 V2
Documentation
Options
Dirt separator kit for VICTRIX PRO 35/55/60/68/80 V2 in cascade
Cod.3.033674
The kit includes connection manifolds and support
Options
Dirt separator kit for single installation
Cod.3.033673
For installation both on right and left side
Options
Granulate for condensate neutralizer VICTRIX PRO V2
Cod.3.034920
For condensate neutralizer until 180 kW
Options
Granulate kit for condensate neutralizer (25 kg)
Cod.3.023663
Complete recharge for condensate neutralizer kit until 1500 kW
Options
Hydraulic manifold kit DN 100 for 2 VICTRIX PRO 100/120/150 V2 in cascade
Cod.3.033667
kit includes a 2 way interception valve, a 3-way interception valve and a
non-return valve for each generator.
Insulation as standard
Options
Hydraulic manifold kit DN 100 for 2 VICTRIX PRO 180 V2 in cascade
Cod.3.034938
Kit to connect 2 VICTRIX PRO 180 V2 in cascade installation; it includes a 2 way interception valve, a 3-way interception valve and a non-return valve for each generator.
Insulation as standard.
Options
Hydraulic manifold kit DN 100 for additional VICTRIX PRO 100/120/150 V2 in cascade
Cod.3.033668
in combination with kit 3.033667 serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve.
Insulation as standard
Options
Hydraulic manifold kit DN 100 for additional VICTRIX PRO 180 V2 in cascade
Cod.3.034939
in combination with kit 3.034938 it serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve. Insulation as standard
Documentation
Options
Hydraulic manifold kit G 2 ½” for 2 VICTRIX PRO 35/55/60/68/80 V2 in cascade
Cod.3.032338
includes a 2-way valves, a 3-way interception valve and a non-return valve
for each generator.
Insulation as standard.
Options
Hydraulic manifold kit G 2 ½” for additional VICTRIX PRO 35/55/60/68/80 V2 in cascade
Cod.3.033669
in combination with kit 3.032338, it serves to connect from 3 to 5 VICTRIX
PRO V2 boilers in cascade installation (one kit required for each additional
boiler); includes a 2-way interception valve, a 3-way interception valve and
a non-return valve. Insulation as standard
Options
Hydraulic manifold kit for VICTRIX PRO 35/55/60/68/80 V2
Cod.3.023951
Specially sized for large thermal systems with high water content. Equipped with sludge collection filter on the return pipe.
Insulation as standard.
Documentation
Options
Hydraulic manifold kit for VICTRIX PRO 100/120/150 /180V2
Cod.3.023952
Specially sized for large thermal systems with high water content.
Equipped with sludge collection filter on the return pipe.
Insulation as standard
Documentation
Options
Hydraulic manifold with safety kit for VICTRIX PRO V2 cabinet
Cod.3.033681
The kit includes hydraulic manifold DN 100, safety kit and condensate discharge
manifold DN 50. The installer has to realise gas manifold based on design.
Documentation
Options
Hydraulic separator for 100 kW installations
Cod.3.020839
Separator with G 2 ½" threaded connectors.
Insulation as standard.
Documentation
Options
Hydraulic separator for 200 kW installations
Cod.3.021377
Separator with G 2 ½" threaded connectors.
Insulation as standard.
Documentation
Options
Hydraulic separator for 350 kW installations
Cod.3.023965
Separator with threaded connectors - DN 100.
Insulation as standard.
Documentation
Options
Hydraulic separator for 400 kW installations
Cod.3.021378
Separator with G 2 ½" threaded connectors on boiler side - DN 100 on system side.
Insulation as standard.
Documentation
Options
Hydraulic separator for 600 kW installations
Cod.3.023962
Separator with threaded connectors - DN 100.
Insulation as standard.
Insulation as standard.
Documentation
Options
Hydraulic separator from ARES Tec 150 kW to ARES Tec 350 kW
Cod.3.023659
To be mainly used when the pump is independently dimensioned by the designer.
Documentation
Options
Hydraulic separator from ARES Tec 440 kW to ARES Tec 900 kW
Cod.3.023660
To be mainly used when the pump is independently dimensioned by the designer.
Documentation
Options
IPX4D protection box kit for cascade safety kit
Cod.3.024038
Documentation
Options
IPX4D protection box kit for single boiler safety kit VICTRIX PRO V2
Cod.3.024028
Documentation
Options
Magnetic dirt separator kit for VICTRIX PRO 100/120/150/180 V2 in cascade
Cod.3.033675
The kit includes connection manifolds and support.
Options
Outdoor casing for safety kit and hydraulic separator from ARES Tec 150 kW to ARES Tec 350 kW
Cod.3.023670
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
Options
Outdoor casing for safety kit and hydraulic separator from ARES Tec 440 kW to ARES Tec 900 kW
Cod.3.023671
In case of outdoor installation of the safety kits and of the hydraulic separator with pump, appropriate casing kits are available to protect from the athmospheric agents.
Documentation
Options
Outdoor casing for safety kit and plate heat exchanger from ARES Tec 150 kW to 350 kW
Cod.3.023672
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
Options
Outdoor casing for safety kit and plate heat exchanger from ARES Tec 440 kW to 900 kW
Cod.3.023673
In case of outdoor installation of the safety kit with pump and plate heat exchanger, casing kits are available to assure protection from athmospheric agents.
Options
Plate heat exchanger kit for cascade installation on the right side of VICTRIX PRO 35/55/60/68/80 V2
Cod.3.033678
The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel.
Documentation
Options
Plate heat exchanger kit for cascade installation on the right side of VICTRIX PRO 100/120/150/180 V2
Cod.3.033679
The kit includes connecting pipes, air vent, discharge tap, filling taps and connection to expansion vessel
Documentation
Options
Plate heat exchanger kit for single installation on the right side of VICTRIX PRO 35/55/80 V2
Cod.3.033676
The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel
Options
Plate heat exchanger kit for single installation on the right side of VICTRIX PRO 100/120/150/180 V2
Cod.3.033677
The kit includes connecting pipes, air vent, discharge tap, filling taps and
connection to expansion vessel
Options
Probe kit for PT 1000 solar collector
Cod.3.019374
Used to manage solar plant paired to boiler configurations with cascade
and zone regulator kit
Options
Safety kit DN 100 for VICTRIX PRO 100/120/150/180 V2 in cascade
Cod.3.023961
the kit includes thermometer, thermometer holder, lock, thermostat with
manual reset, connection tap for pressure gauge, manual reset pressure
switch, gas intercepting valve trap, expansion vessel connection and
pressure switch for minimum pressure. Insulation as standard
Documentation
Options
Safety kit complete with pump and hydraulic separator for ARES 900 Tec
Cod.3.023649
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Documentation
Options
Safety kit complete with pump and hydraulic separator for ARES Tec 200/250
Cod.3.023646
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Documentation
Options
Safety kit complete with pump and hydraulic separator for ARES Tec 200/250
Cod.3.023645
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Options
Safety kit complete with pump and hydraulic separator for ARES Tec 300/350 kW
Cod.3.023647
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Documentation
Options
Safety kit complete with pump and hydraulic separator from ARES Tec 440 kW to ARES Tec 770 kW
Cod.3.023648
The following kit includes a "Y" filter, a modulating pump class A, an hydraulic separator and following safety devices: pressure gauge with pipe damper and manometer cock, thermometer, inspection openings, stube pipe G1 ¼'' for inserting safety valves, safety thermostat, pressure switch for minimum pressure with manual reset, additional stube pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve (2 for 660/770/900 kW versions), drain valve and manometer, since these need to be sized according to the characteristics of the system.
Documentation
Options
Safety kit complete with pump and plate heat exchanger for ARES 770 Tec
Cod.3.023654
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Documentation
Options
Safety kit complete with pump and plate heat exchanger for ARES 900 Tec
Cod.3.023655
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Documentation
Options
Safety kit complete with pump and plate heat exchanger for ARES Tec 150/200
Cod.3.023650
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Documentation
Options
Safety kit complete with pump and plate heat exchanger for ARES Tec 250/350 kW
Cod.3.023651
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Documentation
Options
Safety kit complete with pump and plate heat exchanger for ARES Tec 440/550 kW
Cod.3.023652
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Documentation
Options
Safety kit complete with pump and plate heat exchanger for ARES 660 Tec
Cod.3.023653
Ideal for system solutions where the primary circuit of the boiler needs to be completely separate from the one of the plant, like for example in presence of old-fashioned plants with high risks of dirt inside the circuit, disjunctions between open and closed vessel circuits or to allow the use of anti-freeze liquid in smaller quantities in case of installation of the boiler outdoors.
The kit includes a 316 L stainless steel plate heat exchanger, a modulating pump class A, a 8 litres expansion vessel (150/350 kW versions) and 24 litres (440/900 kW versions), an automatic air vent, delivery/return pipe, a drain valve, flanges/adapters, connectors, adjustable support components and the following safety devices: 1 safety valve 5 bar (2 valves for models 660/770/900), 3-way drain valve ½", manometer and dumper tube for manometer, thermometer with trap, minimum pressure switch with manual reset, safety pressure switch, inspection thermostat, inspection opening, coupling M/F ½'', paddle flow switch and stube pipes adapters.
Documentation
Options
Safety kit single boiler VICTRIX PRO V2
Cod.3.023949
The kit includes thermometer, thermometer holder, lock, thermostat with manual reset, connection tap for pressure gauge, manual reset pressure switch, gas intercepting valve trap, expansion vessel connection and pressure switch for minimum pressure. Insulation as standard.
Documentation
Options
Safety kit with filter for ARES 900 Tec - ARES PRO 600
Cod.3.023658
The kit includes filter and safety devices except safety valve, manometer, expansion vessel and fuel relief valve.
Documentation
Options
Safety kit with filter for ARES PRO 150÷230
Cod.3.028336
The kit includes filter and safety devices except safety valve, manometer, expansion vessel and fuel relief valve.
Options
Safety kit with filter for ARES PRO 300÷500
Cod.3.028337
The kit includes filter and safety devices except safety valve, manometer, expansion vessel and fuel relief valve.
Options
Safety kit with filter from ARES Tec 150 kW to ARES Tec 350 kW
Cod.3.023656
To be mainly used when the pump is dimensioned by designer. The safety kit includes: pressure gauge with pipe damper and, manometer cock, thermometer, inspection openings, stub pipes G1 ¼'' for inserting safety valves, safety thermostat, manual reset pressure switch for minimum pressure, additional stub pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve, drain valve and manometer, since these need to be sized according to the characteristics of the system.
Documentation
Options
Safety kit with filter from ARES Tec 440 kW to ARES Tec 770 kW
Cod.3.023657
To be mainly used when the pump is dimensioned by designer. The safety kit includes: pressure gauge with pipe damper and, manometer cock, thermometer, inspection openings, stub pipes G1 ¼'' for inserting safety valves, safety thermostat, manual reset pressure switch for minimum pressure, additional stub pipe G1, safety pressure switch and differential flow switch.
The kit does not include the tested expansion tank, safety valve, drain valve and manometer, since these need to be sized according to the characteristics of the system.
Documentation
Options
Solar collector probe
Cod.3.025467
To be used to manage the solar system coupled to thermal plants using the cascade and zone regulator.
Options
Storage tank probe kit
Cod.3.015268
Used to manage the temperature of the water tank unit paired, in boiler
rooms, with cascade and zone regulator kit
Options
Three-way valve kit connection to a separate storage tank VICTRIX PRO V2
Cod.3.023950
The kit includes the storage tank probe. The power supply is 230 Vac.
Insulation as standard.
Documentation
Options
VICTRIX PRO V2 Cabinet kit
Cod.3.033680
it can be installed outdoor.
It includes 4 support feet that ensure stable installation and its handling by
forklift truck or transpallet to be positioned below the cabinet frame.
Alternatively, you can move the cabinet by means of 4 eyebolts in the upper
part.
The cabinet has a door that can be opened by 180 inclusive of lock.
Options
“Free standing” support frame kit VICTRIX PRO 35/55/60/68/80 V2
Cod.3.032347
Designed to resolve installation situations in which the wall of the boiler
room is not usable.
With this modular construction, it is necessary to order a kit for every boiler
installed.
Approved also for installation outside the building.
Options
“Free standing” support frame kit VICTRIX PRO 100/120/150 V2
Cod.3.033686
Designed to resolve installation situations in which the wall of the boiler
room is not usable.
With this modular construction, it is necessary to order a kit for every boiler
installed.
Approved also for installation outside the building
Options
All-purpose connection kit for wall-hung combi boilers
Cod.3.011667
For wall-hung combi boilers and also for wall-hung with built-in storage tank.
Documentation
Options
Anti-scale kit
Cod.3.016305
Available for: MAIOR EOLO, NIKE Mini 28 kW Special and MINI NIKE/EOLO.
Options
Anti-scale kit
Cod.3.013499
For VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24
Documentation
Options
Clock kit for Recirculation
Cod.3.015431
To be used to manage the recirculation pump.
Documentation
Options
Connection kit for EOLO Extra 24 kW
Cod.3.019335
Documentation
Options
Connection kit for MAIOR EOLO and MINI EOLO 28
Cod.3.021453
Documentation
Options
Connection kit for NIKE Mini 28 kW Special
Cod.3.016671
Documentation
Options
Connection kit for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS
Cod.3.015229
for VICTRIX OMNIA, MYTHOS HP, EOLO/NIKE STAR 24 and NIKE/EOLO MYTHOS
Documentation
Options
D.H.W. expansion vessel for AVIO/ZEUS kW
Cod.3.017744
Documentation
Options
DIM 2 ZONES ErP
Cod.3.025607
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold, 2 low-consumption pumps and electronic board.
Hydraulic manifold, 2 low-consumption pumps and electronic board.
Documentation
Options
DIM 3 ZONES ErP
Cod.3.025608
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps and electronic board.
Documentation
Options
DIM BASIC ErP
Cod.3.025606
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
Hydraulic manifold and 1 low-consumption pump.
Hydraulic manifold and 1 low-consumption pump.
Documentation
Options
DIM H-2LT ErP
Cod.3.025610
Kit for mixed systems with 2 low temperature zones and 1 high temperature zone.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 3 low consumption pumps, 2 mixing valves and electronic board.
Documentation
Options
DIM H-LT ErP
Cod.3.025609
Multisystem distribution manifolds for the management of zone systems and systems requiring great water flows.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.
High energetic efficiency thanks to class A pumps. Hydraulic manifold, 2 low consumption pumps, 1 mixing valve and electronic board.
Documentation
Options
Recirculation kit
Cod.3.015380
Domestic hot water pump included.
Available for ZEUS kW, ZEUS SUPERIOR kW, VICTRIX ZEUS SUPERIOR ErP, VICTRIX ZEUS and AVIO ECO 24.
Documentation
Options
Recirculation kit for VICTRIX Zeus
Cod.3.012944
Only probe pipe, not pump included.
Available for VICTRIX Zeus.
Options
Shut off knobs with filter
Cod.3.015854
For wall-hung boilers.
Documentation
Options
Shut-off knobs
Cod.3.014948
For DIM ErP
Options
Solar valve
Cod.3.018911
Allows the connection between combi boiler and solar system.
Available for: VICTRIX Superior TOP, VICTRIX, MAIOR EOLO, NIKE Mini 28 kW Special, MINI NIKE/EOLO and NIKE/EOLO Star.
Documentation
Options
Wall mounting brackets for external unit
Cod.3.034758
For outdoor unit of MAGIS COMBO V2, MAGIS COMBO PLUS V2, TRIO PACK, TRIO HYDRO, MAGIS HERCULES PRO, MAGIS PRO V2, MAGIS HERCULES PRO MINI, MAGIS HERCULES MINI HYDRO, THOR, GOTHA and MULTI 18-27.
Documentation
